| Product Description |
| Valve positioner and valve control module |
| General specifications |
| Switching element function | programmable |
| Rated operating distance | 3 mm |
| Installation | flush mountable |
| Output polarity | AS-Interface |
| Assured operating distance | 0 ... 2.43 mm |
| Reduction factor rAl | 0.5 |
| Reduction factor rCu | 0.45 |
| Reduction factor r304 | 1 |
| Reduction factor rSt37 | 1.2 |
| Slave type | Standard slave |
| AS-Interface specification | V2.1 |
| Required master specification | ≥ V2.1 |
| Nominal ratings |
| Operating voltage | 26.5 ... 31.9 V via AS-i bus system |
| Switching frequency | 0 ... 100 Hz |
| No-load supply current | ≤ 35 mA |
| Functional safety related parameters |
| MTTFd | 842 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| LED IN | switching state (input); LED yellow |
| LED OUT | binary LED yellow/red
yellow: switching state
red: lead breakage/short-circuit |
| Compliance with standards and directives |
| Standard conformity | |
| Electromagnetic compatibility | EN 50295:1999-10
|
| Approvals and certificates |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Mechanical specifications |
| Connection (system side) | connector M12 x 1, 4-pin |
| Connection (valve side) | 0.5 m, PVC cable |
| Core cross-section (valve side) | 0.75 mm2 |
| Protection degree | IP67 |
| Material | |
| Housing | PBT |
| Note | valve voltage limited to 26,4 V max.; valve power 2,5 W max. |
