Welcome to Pepperl-Fuchs International!
Control interface unit
IC-KP2-1HRX-2V1
- LED status indicator of bus communication and read/write head
Datasheet as PDF in following languages:
Technical Data: IC-KP2-1HRX-2V1
| Product Description | ||
| Control interface unit IDENTControl Compact with serial interface |
||
| General specifications | ||
| Number of read/write heads | max. 1 | |
| UL File Number | E87056 | |
| Functional safety related parameters | ||
| MTTFd | 160 a | |
| Mission Time (TM) | 10 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| LED 1 | Status indicator for read/write head green: command at read/write head active yellow: approx. 1 second long, if command was successfully executed |
|
| LED CH1 | green: read head detected red: Configuration error |
|
| LED PWR/ERR | green: power on red: Hardware fault |
|
| LED TxD | green: flashes in rhythm with the transmitted data | |
| LED RxD | green: flashes in rhythm of receiving data | |
| Electrical specifications | ||
| Rated operating voltage | 20 ... 30 V DC , PELV | |
| Ripple | ≤ 10 % at 30 V DC | |
| Current consumption | ≤ 4 A incl. read/write heads | |
| Power consumption | 2 W Without read/write head | |
| Electrical isolation | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff | |
| Interface 1 | ||
| Interface type | serial | |
| Physical | RS 485 | |
| Protocol | ASCII | |
| Interface 2 | ||
| Interface type | serial | |
| Physical | RS 232 | |
| Protocol | ASCII | |
| Transfer rate | 1200; 2400; 4800; 9600; 19200; 38400 Bit/s | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 61000-6-2:2006, EN 61000-6-4:2007 | |
| Standard conformity | ||
| Protection degree | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Climatic conditions | air humidity max. 96 % Salt spray resistant to EN 60068-2-52 |
|
| Shock and impact resistance | Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6 Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27 |
|
| Mechanical specifications | ||
| Protection degree | IP67 | |
| Connection | read/write head: M12 plug connection, 4-pin, screened, Power supply: M12 connector Protective earth: M4 earthing screw RS 232: M12 plug connection RS 485: M12 connector |
|
| Material | ||
| Housing | Powder coated zinc | |
| Installation | screw fixing | |
| Mass | approx. 500 g | |
Documents: IC-KP2-1HRX-2V1
| Instructions, Short instructions, Safety information | Language | File Type | File Size |
| Quick Start Guide IC-KP2-* | ENG | 2285 KB | |
| Kurzanleitung IC-KP2-* | GER | 2341 KB | |
| Manuals | |||
| Manual Read / Write Ranges RFID | ENG | 4151 KB | |
| Handbuch Schreib- und Leseabstände RFID | GER | 4165 KB | |
| Manual IC-KP2-1HRX-2V1 | ENG | 2746 KB | |
| Handbuch IC-KP2-1HRX-2V1 | GER | 2737 KB | |
CAD+CAE: IC-KP2-1HRX-2V1
| CAD | File Type | File Size |
| 3D Modell/3D model | IGS | 2475 KB |
| 3D Modell/3D model | STP | 1536 KB |
Approvals+Certificates: IC-KP2-1HRX-2V1
| Certificates | Certificate No. | File Type | File Size |
| US CA UL | E87056 | LINK | --- |
| Europe Pepperl+Fuchs 2004/108/EC (EMC) Declaration of Conformity | PF 08 CERT 1262 | 357 KB |
Associated Products: IC-KP2-1HRX-2V1
| Accessories | Name |
| V1S-G-0,15M-PUR-ABG-SUBD | Connection cable |
| V1-G-5M-PUR-ABG-V1-W | Connection cable |
| V1-G-10M-PUR-ABG-V1-W | Connection cable |
| ICZ-MH05-SACB-8 | Mounting aid |
| RFIDControl | RFIDControl |
| Accessory of | Name |
| IUH-F190-V1-EU | Read/write head |