Serviceline Information

Technologies


  • Basic monitoring for power supply output and health
  • Plug-in Module for the FieldConnex Power Hub
  • Plug and play - no engineering required
  • For online monitoring
  • For FOUNDATION Fieldbus H1 and PROFIBUS PA
  • Installation in Zone 2/Class I, Div. 2
  • System state and fault indication via LEDs

Datasheet as PDF in following languages:


Technical Data: HD2-DM-B

Supply
Rated voltage19.2 ... 35 V
Rated current20 mA
Power lossmax. 0.5 W
Indicators/operating means
LED PRI PWRgreen: on, primary bulk power supply connected
LED SEC PWRgreen: on, secondary bulk power supply connected
LED ERRred: 2 Hz flashing, power supply fault (short-circuit, undervoltage), redundancy fault
Fault signalVFC alarm 1 A, 50 V DC, normally closed
Directive conformity
Electromagnetic compatibility
Directive 2004/108/ECEN 61326-1:2006
Standard conformity
Electromagnetic compatibilityNE 21:2006
Protection degreeIEC 60529
Shock resistanceEN 60068-2-27
Vibration resistanceEN 60068-2-6
Ambient conditions
Ambient temperature-40 ... 60 °C (-40 ... 140 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humidity< 95 % non-condensing
Shock resistance15 g 11 ms
Vibration resistance1 g , 10 ... 150 Hz
Corrosion resistanceacc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection typeMotherboard specific
Core cross-sectionMotherboard specific
Housing width18 mm
Housing height106 mm
Housing depth128 mm
Protection degreeIP20
Massapprox. 70 g
Mountingmotherboard mounting
Data for application in connection with Ex-areas
Statement of conformityTÜV 04 ATEX 2500 X
Group, category, type of protection, temperature classEx-Hexagon II 3G EEx nA C IIC T4
Directive conformity
Directive 94/9/ECEN 60079-15:2003
International approvals
FM approvalCoC 3024816, CoC 3024816C
Approved forClass I, Division 2, Groups A, B, C, D, T4 / Class I, Zone 2, AEx/Ex nC IIC T4

Documents: HD2-DM-B

Instructions, Short instructions, Safety informationLanguageFile TypeFile Size
ManualENGPDF3044 KB

Approvals+Certificates: HD2-DM-B

CertificatesCertificate No.File TypeFile Size
Europe TUV Nord ATEX Category 3 GTÜV 04 ATEX 2500XPDF1033 KB
USA FMCoC 3024816PDF136 KB
Canada FMCoC 3024816CPDF142 KB
Russia NANIO "CCVE" GOST-RRUSS IT.GB 05.B04073PDF3310 KB
Pepperl+Fuchs ATEX II 3 G Declaration of ConformityPF 12 CERT 2518PDF102 KB
Europe Pepperl+Fuchs ATEX II 3 G Declaration of ConformityPF 12 CERT 2519PDF90 KB
Europe Pepperl+Fuchs ATEX II 3 G Declaration of ConformityPF 12 CERT 2520PDF119 KB

Associated Products: HD2-DM-B

Matching system componentsName
MB-FB-4R.YOUniversal Fieldbus Power Hub, Motherboard for Yokogawa ALF 111
MBHC-FB-8R.HSC*Compact Fieldbus Power Hub, Motherboard, Generic Interface
MB-FB-4RUniversal Fieldbus Power Hub, Motherboard, Common Interface
MB-FB-4Universal Fieldbus Power Hub, Motherboard, Common Interface
MB-FB-4.YOUniversal Fieldbus Power Hub, Motherboard for Yokogawa ALF 111
MBHC-FB-8R.RH*Compact Fieldbus Power Hub, Motherboard, Redundant Host Terminals
FBTA-228-BPFB-R-8RCompact Fieldbus Power Hub, Motherboard for Invensys FBM 228
MBHC-FB-8R.YOCompact Fieldbus Power Hub, Motherboard for Yokogawa ALF 111
MBHC-FB-8RCompact Fieldbus Power Hub, Motherboard, Common Interface
MBHD-FB1-4R.YOHigh-Density Fieldbus Power Hub, Motherboard for Yokogawa ALF 111
MB-FB-2RUniversal Fieldbus Power Hub, Motherboard, Common Interface
MB-FB-4.GENUniversal Fieldbus Power Hub, Motherboard, Generic Interface
MB-FB-4R.GENUniversal Fieldbus Power Hub, Motherboard, Generic Interface
MB-FB-SystemFieldbus Power Hub System
MB-FB-4R.HO.SCHigh-Density Fieldbus Power Hub, Motherboard for Honeywell C-Series
KT-MB-FB-D-4RDART High-Density Power Hub, Common Interface
KT-MB-FB-D-4R.GENDART High-Density Power Hub, Generic Interface
KT-MB-FB-D-4R.YODART High-Density Power Hub for Yokogawa ALF 111
MBHD-FB1-4RHigh-Density Fieldbus Power Hub, Motherboard, Common Interface