| Product Description |
| Stationary high-speed read device for code speeds up to 20 m/s and 60 fps, Data Matrix ECC 200 Code, straight line of sight, VGA resolution, Ethernet, RS 232 |
| General specifications |
| Laser nominal ratings | |
| Laser class | 2 |
| Wave length | 650 nm |
| Symbologies | Data Matrix ECC 200 |
| Read distance | 60 mm |
| Reading field | 30 mm x 20 mm |
| Modul size | min. 0.2 mm |
| Electrical specifications |
| Operating voltage | 24 V DC ± 15% , PELV |
| No-load supply current | max. 250 mA |
| Power consumption | 6 W |
| Interface |
| Physical | RS 232 |
| Protocol | ASCII |
| Transfer rate | 9600 ... 115200 Bit/s |
| Cable length | max. 30 m |
| Interface 1 |
| Interface type | Ethernet |
| Protocol | TCP/IP |
| Transfer rate | 100 MBit/s |
| Input |
| Cable length | max. 30 m |
| Output |
| Cable length | max. 30 m |
| Output 1 |
| Output type | Video output, RGB (75 Ohm), 1 Vpp |
| Resolution | VGA, 800 x 600 pixels |
| Compliance with standards and directives |
| Directive conformity | |
| EMC Directive 2004/108/EC | EN 61326-1 , EN 61000-6-4 |
| Standard conformity | |
| Noise immunity | EN 61326-1 |
| Emitted interference | EN 61000-6-4 |
| Protection degree | EN 60529 |
| Laser class | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient conditions |
| Ambient temperature | 0 ... 45 °C (32 ... 113 °F) |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
| Protection degree | IP20 |
| Connection | Video: 7-pin socket Power supply/interfaces/inputs and outputs: Sub-D 15-pin UNC LAN : RJ-45 socket, 8-pin |
| Material | |
| Housing | powder coated diecast zinc |
| Mass | approx. 730 g |