Spring steel coupling, Universally suitable for backlash-free rotation transmission, Highly vibration-isolating, Well misalignment compensation, Low torsion spring stiffness, Small reset forcesfa
Not available for purchase: 1-channel trip amplifier, Current monitoring (0 ... 20 mA), 115/230 V AC operating voltage, Integrated voltage supply for analog output sensors, Adjustment of 2 limit value windows with potentiometers (S1.1 for switch-on threshold and S1.2 for switch-off threshold), Rated voltage: 98 ... 126 V AC , 198 ... 253 V AC; 45 ... 65 Hzfa
Not available for purchase: 2-channel isolated switch amplifier, Control circuit designed for the direct current versions of ultrasonic sensors and proximity sensors, 230 V AC/115 V AC mains nominal voltage, Switching frequency 10 kHz, Each with 1 relay output with 1 changeover contactfa
Not available for purchase: 1-channel, Installation in Zone 1, Zone 21, and Class I Div. 1, WirelessHART Adapter, Cast aluminum housing, Battery operated, Also supplies field device, Input 2-wire HART transmitters and 2-wire HART current sources, Output WirelessHART wireless interface, Direct mounting on HART or 4 mA ... 20 mA field device, Rotatable antennapa
Not available for purchase: 1-channel, WirelessHART Adapter, Battery operated, Also supplies field device, Input 2-wire HART transmitters and 2-wire HART current sources, Output WirelessHART wireless interface, Direct mounting on HART or 4 mA ... 20 mA field device, Rotatable antennapa
Not available for purchase: 1-channel, Installation in Zone 1, WirelessHART Adapter, Battery operated, Also supplies field device, Input 2-wire HART transmitters and 2-wire HART current sources, Output WirelessHART wireless interface, Direct mounting on HART or 4 mA ... 20 mA field device, Rotatable antennapa
Not available for purchase: Cast aluminum housing, Loop powered, Direct mounting on HART or 4 mA ... 20 mA field device, Encapsulated antenna, Up to 8 field devices in multidroppa
Not available for purchase: Installation in Zone 0, 20, Installation in Class I, II, Division 1, Installation in Class III, Installation in Class I, Division 2, Ex i circuits for Ex i field devices, Cast aluminum housing, Loop powered, Direct mounting on HART or 4 mA ... 20 mA field device, Encapsulated antenna, Up to 8 field devices in multidroppa
Not available for purchase: Installation in Zone 1, 21, Installation in Class I, II, Division 1, Installation in Class III, Ex d housing for Ex d field devices, Cast aluminum housing, Loop powered, Direct mounting on HART or 4 mA ... 20 mA field device, Encapsulated antenna, Up to 8 field devices in multidroppa
Not available for purchase: Wireless ultrasonic sensor with GSM (2G) interface, Battery operated, Transfer of telemetry data via GSM (2G) radio interface, Bluetooth interface for adjustment of the sensor, Power supply: high capacity lithium battery 3.6 V , 13000 mAh battery lifetime approx. 5 years under Central European environmental conditions (- 25 °C .... + 70 °C) 3 measurements/day, 1 geolocation/day with 1 wireless transmission/day with sufficient network coverage., Interface type: Bluetooth 5.0 LE, Interface type: GSMfa
Not available for purchase: Wireless ultrasonic sensor with LoRaWAN interface, Battery operated, Data transfer via LoRaWAN, Bluetooth interface for commissioning, parameterization and diagnostics, Power supply: high capacity lithium battery 3.6 V , 13000 mAh battery lifetime approx. 5 years under Central European environmental conditions (- 25 °C .... + 70 °C) 3 measurements/day, 1 geolocation/day with 1 wireless transmission/day with sufficient network coverage., Interface type: Bluetooth 5.0 LE, Interface type: LoRaWANfa
12311-12320/12343Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.