Select Your Country
HiC2031HC SMART Current Driver
Key Benefits at a Glance
- 1-channel isolated barrier
- 24 V DC supply (bus powered)
- Current output up to 625 Ω load
- HART-IP and valve positioner
- Low power dissipation
- Suitable for long field cables (> 1000 m)
- Up to SIL 2 (SC 3) acc. to IEC/EN 61508
Show more






Note
All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
EN
- EN
- DE
- ES
- FR
- PL
Technical data of HiC2031HC
| Signal type | Analog output |
| Safety Integrity Level (SIL) | SIL 2 | |
| Systematic capability (SC) | SC 3 |
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) | |
| Rated voltage | Ur | 19 ... 30 V DC bus powered via Termination Board |
| Ripple | ≤ 10 % | |
| Rated current | Ir | ≤ 35 mA |
| Power dissipation | ≤ 600 mW | |
| Power consumption | ≤ 700 mW |
| Connection side | control side | |
| Connection | SL1: 8a(+), 7a(-) | |
| Input signal | 4 ... 20 mA , limited to approx. 27 mA | |
| Input voltage | depending on switch configuration open loop voltage of the control system < 19 V open loop voltage of the control system < 26 V | |
| Voltage drop | depending on switch configuration open loop voltage of the control system < 19 V: approx. 5 V at 20 mA open loop voltage of the control system < 26 V: approx. 12 V at 20 mA | |
| Input resistance | > 100 kΩ, with field wiring open |
| Connection side | field side | |
| Connection | SL2: 5a(+), 5b(-) | |
| Voltage | ≥ 12.5 V at 20 mA | |
| Current | 4 ... 20 mA | |
| Load | 0 ... 625 Ω | |
| Ripple | 20 mV rms |
| Deviation | at 20 °C (68 °F), 4 ... 20 mA ≤ ± 0.1 % incl. non-linearity and hysteresis | ||||
| |||||
| Frequency range | field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 1 mApp signal 0 ... 3 kHz (-3 dB) | ||||
| Rise time | 10 to 90 % ≤ 100 ms | ||||
| Display elements | LED | |
| Control elements | DIP switch | |
| Factory setting | input: max. input voltage 19 V | |
| Configuration | via DIP switches | |
| Labeling | space for labeling at the front |
| Electromagnetic compatibility | |||||
| |||||
| Electromagnetic compatibility | NE 21:2012 For further information see system description. | |
| Degree of protection | IEC 60529 |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection | IP20 | ||||||||||
| Mass | approx. 100 g | ||||||||||
| Dimensions | 12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D) | ||||||||||
| |||||||||||
| Mounting | on termination board | ||||||||||
| Coding | pin 2 and 4 trimmed For further information see system description. | ||||||||||
| EU-type examination certificate | CESI 11 ATEX 012 | ||||||||||||||||
| |||||||||||||||||
| Supply | |||||||||||||||||
| |||||||||||||||||
| Equipment | SL2: 5a(+), 5b(-) | ||||||||||||||||
| |||||||||||||||||
| Output | |||||||||||||||||
| |||||||||||||||||
| Certificate | CESI 19 ATEX 050 X | ||||||||||||||||
| |||||||||||||||||
| Galvanic isolation | |||||||||||||||||
| |||||||||||||||||
| Directive conformity | |||||||||||||||||
| |||||||||||||||||
| UL approval | E106378 | |||||||
| ||||||||
| IECEx approval | ||||||||
| ||||||||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Related Pages
Are you looking for more information? Feel free to learn more on our related pages.
Related News and Applications
Read more on news and applications related to this product.

