Select Your Country

Go to global website

UBE800-F77-SE1-V31 Ultrasonic Thru-Beam Sensor

Ultrasonic thru-beam sensor

Key Benefits at a Glance

  • Miniature design
  • Highly visible LEDs for Power ON and switching state
  • High switching frequency
  • Program input
  • Degree of protection IP67

Show more

Product Compliance: Europe – CE
Product Compliance: USA - cULus
Product Compliance: United Kingdom – UKCA
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN
  • EN
  • DE
  • ES
  • FR
  • JA

Technical data of UBE800-F77-SE1-V31

Sensing range0 ... 800 mm emitter/receiver spacing
Standard target platesee table
Transducer frequencyapprox. 300 kHz
Response delay≤ 5 ms
Permissible cable lengthmax. 300 m
LED greenPower on ( emitter )
LED yellowswitching state ( receiver )
Rated operating voltageUe24 V DC
Operating voltageUB20 ... 30 V DC , ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 80 %
No-load supply currentI0≤ 20 mA
Time delay before availabilitytv≤ 150 ms
Input type1 program input (receiver)
Levellow level : 0 ... 0.7 V ;   high level : > 14 V
Input impedance16 kΩ
Pulse length≥ 3 s
Output type1 switch output E1, NPN, NC
Rated operating currentIe200 mA , short-circuit/overload protected
Voltage dropUd≤ 2 V
Switching frequencyf  100 Hz
Off-state currentIr≤ 0.01 mA
Standard conformity
StandardsEN IEC 60947-5-2:2020
IEC 60947-5-2:2019
UL approvalcULus Listed, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Shock resistance30 g , 11 ms period
Vibration resistance10 ... 55 Hz , Amplitude ± 1 mm
Connection typeM8 x 1 connector , 4-pin
Degree of protectionIP67
Material
HousingPolycarbonate
Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam
Installation positionany position
Massper 10 g
Tightening torque, fastening screwsmax. 0.2 Nm
Dimensions
Height31 mm
Width12 mm
Length23 mm
General Notes

Related Pages

Are you looking for more information? Feel free to learn more on our related pages.