OBT300-R100-E5-V31-L Triangulation sensor (BGS)

Key Benefits at a Glance

Miniature design with versatile mounting options
DuraBeam Laser Sensors - durable and employable like an LED
Extended temperature range
-40 °C ... 60 °C
High degree of protection IP69K
External TEACH-IN

Product photo: Triangulation sensor (BGS) OBT300-R100-E5-V31-L

Dimensions: Triangulation sensor (BGS) OBT300-R100-E5-V31-L

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Datasheet Function Classification Informative Literature Product Documentation Design / Simulation Approvals Software Related Products

Technical data of OBT300-R100-E5-V31-L

Laser diffuse mode sensor with adjustable background suppression

Detection range

7 ... 300 mm

Detection range min.

7 ... 25 mm

Detection range max.

7 ... 300 mm

Adjustment range

25 ... 300 mm

Reference target

standard white, 100 mm x 100 mm

Light source

laser diode

Light type

modulated visible red light

Laser nominal ratings

Note		LASER LIGHT , DO NOT STARE INTO BEAM
Laser class		1
Wave length		680 nm
Beam divergence		> 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
Pulse length		3 µs
Repetition rate		approx. 13 kHz
max. pulse energy		10.4 nJ

Black-white difference (6 %/90 %)

< 5 % at 150 mm

Diameter of the light spot

approx. 1 mm at a distance of 200 mm

Opening angle

approx. 0.3 °

Ambient light limit

EN 60947-5-2 : 40000 Lux

MTTF_d		560 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Operation indicator		Green LED: Permanently lit - power on Flashing (4 Hz) - short circuit
Function indicator		LED yellow: constantly on - object detected constantly off - object not detected
Control elements		Light-on/dark-on changeover switch
Control elements		Sensing range adjuster

Operating voltage	U_B	10 ... 30 V DC
Ripple		max. 10 %
No-load supply current	I₀	< 20 mA at 24 V supply voltage
Protection class		III

Switching type		The switching type of the sensor is adjustable. The default setting is: Q - Pin4: PNP normally open / light-on Teach input - Pin2: High-active input
Signal output		1 PNP, short-circuit protected, reverse polarity protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop	U_d	≤ 1.5 V DC
Switching frequency	f	1650 Hz
Response time		300 µs

Communication interface		IEC 61131-9
Product standard		EN 60947-5-2
Laser safety		EN 60825-1:2014

UL approval		E87056 , cULus Listed , class 2 power supply , type rating 1
FDA approval		IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.