Select Your Country
KFD2-SLD-Ex1.13100 Solenoid Driver
Key Benefits at a Glance
- 1-channel isolated barrier
- 24 V DC supply (Power Rail)
- Logic input
- Output 100 mA at 13 V DC
- Alternating outputs for the operation of solenoids with 2 coils
- High output power for IIB gas group
- Line fault transparency (LFT)
- Test pulse immunity
- Up to SIL 3 acc. to IEC/EN 61508
Show more
Note
All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
EN
- DE
- EN
- ES
- FR
- PL
Technical data of KFD2-SLD-Ex1.13100
| Signal type | Digital Output |
| Safety Integrity Level (SIL) | SIL 3 | |
| Systematic capability (SC) | SC 3 |
| Connection | Power Rail or terminals 14+, 15- | |
| Rated voltage | Ur | 19 ... 30 V DC loop powered |
| Input current | 115 mA at 24 V , 130 Ω load | |
| Power dissipation | 1.5 W at 24 V , 130 Ω load |
| Connection side | control side | |
| Connection | input 1: terminals 7+, 8- , optional Rext between terminals 7 and 9 input 2: terminals 10+, 11- , optional Rext between terminals 10 and 12 | |
| Test pulse length | max. 2 ms from DO card | |
| Input current | approx. 6 mA at 24 V DC If necessary, the current value can be increased by resistor Rext. | |
| Signal level | 1-signal: 15 ... 30 V DC 0-signal: 0 ... 5 V DC |
| Connection side | field side | |
| Connection | output 1: terminals 1+, 2-, 3 output 2: terminals 4+, 5-, 6- | |
| Internal resistor | Ri | approx. 64 Ω |
| Current | Ie | typ. 100 mA |
| Voltage | Ue | ≥ 13 V |
| Current limit | Imax | 105 mA |
| Open loop voltage | Us | typ. 19.2 V |
| Load | nominal 0.08 ... 1 kΩ | |
| Switching frequency | f | max. 2 Hz |
| Energized/De-energized delay | 30 ms / 30 ms |
| Input/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff | |
| Input/input | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff | |
| Output/Output | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff | |
| Output/other circuits | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Display elements | LEDs | |
| Control elements | DIP switch | |
| Configuration | via DIP switches | |
| Labeling | space for labeling at the front |
| Electromagnetic compatibility | |||||
| |||||
| Electromagnetic compatibility | NE 21:2011 For further information see system description. | |
| Degree of protection | IEC 60529:2001 | |
| Protection against electrical shock | EN 61010-1:2010 |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection | IP20 | |
| Connection | screw terminals | |
| Mass | approx. 200 g | |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2 | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| EU-type examination certificate | EXA 17 ATEX 0076X | |||||||||||||
| ||||||||||||||
| Supply | ||||||||||||||
| ||||||||||||||
| Input | ||||||||||||||
| ||||||||||||||
| Galvanic isolation | ||||||||||||||
| ||||||||||||||
| Directive conformity | ||||||||||||||
| ||||||||||||||
II 3(1)G Ex ec [ia IIB Ga] IIC T4 Gc | IECEx approval | ||||||||
| ||||||||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
