NBB1,5-F41-E2 Inductive sensor

Key Benefits at a Glance

1.5 mm flush
3-wire DC
Metal housing

Please contact us for exact delivery estimation.107,00 EUR

Product photo: Inductive sensor NBB1,5-F41-E2

Dimensions: Inductive sensor NBB1,5-F41-E2

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

CS
DE
EN
ES
FR
IT
PL
PT
SV
ZH

Datasheet Classification Design / Simulation Approvals

Technical data of NBB1,5-F41-E2

Switching function		Normally open (NO)
Output type		PNP
Rated operating distance	s_n	1.5 mm
Installation		flush
Output polarity		DC
Assured operating distance	s_a	0 ... 1.215 mm
Reduction factor r_Al		0.45
Reduction factor r_Cu		0.35
Reduction factor r₃₀₄		0.75
Output type		3-wire

Operating voltage	U_B	10 ... 30 V DC
Switching frequency	f	0 ... 1500 Hz
Hysteresis	H	typ. 3 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop	U_d	≤ 3 V
Operating current	I_L	0 ... 100 mA
Off-state current	I_r	0 ... 0.5 mA typ.
No-load supply current	I₀	≤ 15 mA
Time delay before availability	t_v	≤ 20 ms
Switching state indicator		LED, yellow

MTTF_d		1528 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Standard conformity

Standards

EN IEC 60947-5-2

UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature

-25 ... 70 °C (-13 ... 158 °F)

Connection type

cable

Housing material

brass, nickel-plated

Sensing face

PBT

Degree of protection

IP67

Cable

Wire end ferrules		yes
Cable diameter		3 mm + 0.3 mm
Bending radius		> 10 x cable diameter
Material		PVC
Number of cores		3
Core cross section		0.14 mm²
Length	L	2 m

Mass

13.5 g

Dimensions

Height		8 mm
Width		8 mm
Length		40 mm

General Notes