Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Corded 1-D and 2-D Handheld Reader for Zone 2/22 IDM-Z2-x60-D-*

IDM-Z2-x60-D-*
  • Approved for Zone 2 and 22 (ATEX and IECEx)
  • All 1-D standard barcode families supported
  • 2-D model supports Data Matrix, QR, and other two-dimensional codes
  • Fall tested from 2 m to ensure reliability

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  IDM-Z2-x60-D-*

Tuotekuvaus
Corded 1-D and 2-D Handheld Reader for Zone 2/22
General specifications
Typescan frequency: 500 Hz (1-D models), 60 Hz (2-D model)
Light typeLED, visible red light (630 / 1310 nm)
ambient light immunity 100 000 lx
Readable codesbarcode types: Code 39, Code 39 Trioptic, Code 32, Code 93, Code 11, Codabar, Code 128, GS1-128 / EAN 128, UPC / EAN / JAN (with addition), MSI/Plessey, UK/Plessey, IATA, Interleaved 2 of 5, Standard and Industrial 2 of 5, Matrix 2 of 5, Telepen, GS1 DataBar, Australian Post, China Post, German Post, US Planet, US Postnet, British Post, Intelligent Mail, Japan Post, Korean Post, Dutch KIX Post
stacked code types (depending on model selected): PDF417, MicroPDF417, Code 49, Code 16K, Composite, Codablock F
2-D code types (depending on model selected): Data Matrix, QR, MicroQR, Aztec, Maxicode
Read distance20 ... 850 mm (1-D model)
30 ... 380 mm (2-D model)
Resolutionca. ≥ 0.76 mm (1-D models)
ca. ≥ 0.13 mm (2-D model)
Indicators/operating means
Indicators2 x LED (operating state)
beeper/buzzer (can be switched off)
Interface
Interface typeRS-232 TTL, RS-422, and USB
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61000-6-2:2005 + AC:2005 , EN 61000-6-4:2007 + A1:2011
Explosion protection
Directive 2014/34/EUEN 60079-0:2018
EN 60079-11:2012
RoHS
Directive 2011/65/EU (RoHS)EN 50581:2012
Conformity
Supplementary standard conformityEN 60950-1:2006+A1:2010+A2:2013+A11:2009+A12:2011
Ambient conditions
Operating temperature-20 ... 50 °C (-4 ... 122 °F)
Storage temperature-30 ... 70 °C (-22 ... 158 °F)
Relative humidity95 % non-condensing
Impact resistance50 fall tests from 2 m height onto concrete
Mechanical specifications
Degree of protectionIP65
Massapprox. 200 g without cable
Dimensions104 mm x 185 mm x 76 mm
Data for application in connection with hazardous areas
EU-type examination certificateIBExU19ATEXB016X
IECEx IBE 19.0026X
Marking1-D model:
Ex-Hexagon II 3GEx ic IIC T4 Gc
Ex-Hexagon II 3D Ex ic IIIC T135°C Dc
2-D model:
Ex-Hexagon II 3G Ex ic IIB T4 Gc
Ex-Hexagon II 3D Ex ic IIIC T135°C Dc
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.019200390
ECLASS 12.019200390
ECLASS 11.019200390
ECLASS 10.0.119200390
ECLASS 9.019200390
ECLASS 8.019200390
ECLASS 5.127242392
ETIM 9.0EC002999
ETIM 8.0EC002999
ETIM 7.0EC002999
ETIM 6.0EC002999
ETIM 5.0EC002999
UNSPSC 12.143211711

Details: IDM-Z2-x60-D-*

Function

IDM-Z2-x60-D-* corded handheld readers scan 1-D and 2-D codes in Zone 2/22 hazardous locations or safe areas.

1-D models read all common one-dimensional barcode types, with an option available to read stacked codes. The 2-D model reads one-dimensional barcodes and stacked codes, as well as two-dimensional codes such as Data Matrix and QR codes.

Product Documentation: IDM-Z2-x60-D-*

Language Selection:
Safety and Security DocumentationKieliTiedostotyyppiTiedoston koko
KäyttöohjeFINPDF194 KB
Manuals
Manual IDM-Z2-x60-D-*ENGPDF3498 KB
Manufacturer's manualENGPDF4306 KB
Manufacturer's quick start guideENGPDF1240 KB

Approvals: IDM-Z2-x60-D-*

Language Selection:
CertificatesSertifikaatin nroKieliTiedostotyyppiTiedoston koko
ATEX CertificateIBExU19ATEXB016XALLPDF2875 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-5615AALLPDF107 KB

Liitännäistuotteet: IDM-Z2-x60-D-*

Accessory of
VisuNet GXP PC Zone 2/22 (2020 Generation, Intel® Atom Apollo Lake Processor), 21.5" (54.61 cm) display, 16:9 aspect ratio widescreen formatting to match engineering stations, PC solution with pre-installed Windows® operating system, Lightweight design, Full HD Resolution, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 2/22pa
VisuNet GXP Remote Monitor Zone 2/22 (2020 Generation, Intel® Atom Apollo Lake Processor), 21.5" (54.61 cm) display, 16:9 aspect ratio widescreen formatting to match engineering stations, Thin Client solution (with VisuNet RM Shell firmware), Lightweight design, Full HD Resolution, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 2/22pa
VisuNet GXP PC Zone 2/22 (2020 Generation, Intel® Atom Apollo Lake Processor), 19 in (48 cm) display, PC solution with pre-installed Windows® operating system, Lightweight design, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 2/22, UL listed for USA and Canadapa
VisuNet GXP Remote Monitor Zone 2/22 (2020 Generation, Intel® Atom Apollo Lake Processor), 19 in (48 cm) display, Thin Client solution (with VisuNet RM Shell firmware), Lightweight design, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 2/22, UL listed for USA and Canadapa
Accessories
Stainless steel holder for for IDM-Z1- handheld readers, compatible with AG-XX00 housing, Mounting bracket, Simple and fast mounting, Compatible with AG-XX00 housing (adapter included), Compatible with 1-D/2-D code handheld readers such as the IDM and Ident-Ex® portfoliospa
Stainless steel holder for for IDM-Z1- handheld readers, compatible with AG1 housing, Mounting bracket, Simple and fast mounting, Compatible with AG1 housing (adapter included), Compatible with 1-D/2-D code handheld readers such as the IDM and Ident-Ex® portfoliospa
Stainless steel holder for IDMx6x handheld readers and Ident-Ex® 01, compatible with AG-3200 housing, Mounting bracket, Simple and fast mounting, Compatible with AG-3200 housing (adapter included), Compatible with 1-D/2-D code handheld readers such as the IDM and Ident-Ex® portfoliospa
Connection cable for IDM-Z1-x6x-D-* corded Handheld Readers, Connection cable for corded IDM-Z1-x6x-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1 + 21 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa
Connection cable for IDM-Zx-x6x-D-* corded Handheld Readers, Connection cable for corded IDM-Zx-x6x-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1/21 and Zone 2/22 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa
Connection cable for IDM-Zx-x6x-D-* corded Handheld Readers, Connection cable for corded IDM-Zx-x6x-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1/21 and Zone 2/22 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa
Connection cable for IDM-Z1-x6x-D-* corded Handheld Readers, Connection cable for corded IDM-Z1-x6x-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1 + 21 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa
1 m connector cable for corded handheld reader with M12 connector to open cable end, Connector cable for wired 1-D Scanner IDM-Z1-16x-D-1D-J1-S-* and 2-D Scanner IDM-Z1-26x-D-2D-J1-S* and Bluetooth Basestation IDM-Z1-x6x-B-J1-BT-N0, 4-wire with ferrules, IDM Scanner connection via M12-connector, Note: Supports only RS232 Scanner/Basestationpa
Cable barrier for corded IDM-Z2-* handheld readers and base station, Cable-Barrier for corded 1-D and 2-D reader and base station, Enable operation in Zone 2/22, USB Ex ic (via M12 female socket) connectionpa
Cable barrier for corded IDM-Z2-* handheld readers and base station, Cable-Barrier for corded 1-D and 2-D reader and base station, Enable operation in Zone 2/22, Serial RS-232/422 Ex ic (via M12 female socket) connectionpa