Single-beam light scanner, Can be used to monitor both main and ancillary closing edges, Closing edge safety on revolving doors and carousel doors, Accurate beam alignment thanks to finely bundled light beam, Background evaluation operating mode: uses the background as a reference for detecting difficult objects, Function: Secure, Sensor principle: Active infrared scanner, Operating voltage: 10 ... 48 V DC / 11 ... 36 V AC, Signal output: relay, 1 NO, Connection: 5 m fixed cablefa
See Overview: FieldConnex Process Interfaces connect multiple conventional inputs & outputs to the fieldbus with minimum cabling Process Interfaces allow flexibility through standard function blocks ... The FieldConnex® Temperature Multi-Input Device(TM-I) integrates up to eight analog signals into digital fieldbus communication in a very efficient and cost-effective way. The following types of devices and signals can be connected: Resistive temperature sensors ...
See Overview: FieldConnex Process Interfaces connect many conventional inputs & outputs to the fieldbus with less cabling Process Interfaces for PROFIBUS PA allow flexibility through standard functio ... Temperature Multi-Input Device The FieldConnex® Temperature Multi-Input Device ( TM-I ) integrates up to eight analog signals into digital fieldbus communication in a very efficient and cost-effective way. The following types of devices and signals can ...
See Overview: DMT grounding systems are Ex d and Ex tb certified and designed to monitor the capacitance and resistance of equipment where static charges can occur ... fitted to 8 meters of cable. Therefore, the devices measure and monitor the continuity to earth in order to eliminate electrostatic charges while vehicles transfer combustible products. Contact your Pepperl+Fuchs representative to learn about your ...
Learn more about radar frequency bands and different types of radar systems ... range of up to two gigahertz (GHz). The C-band (4 to 8 GHz) is used for weather radar and monitoring the sea surface. Radio waves in the X-band (8 to 12 GHz) offer high resolution and can penetrate thin walls. They are therefore suitable for precision ...
See Overview: Pepperl+Fuchs offers a wide range of field connectors for industrial applications ... threading types (M8, M12, M9, M23, valve connector, RD24, 1/2″, 7/8″), our field connectors portfolio covers a variety of pole numbers, straight or angled versions, as well as pin or socket contacts. With this many options, you always get the field connector ...
Automatic doors, elevators, escalators, barriers or public transport: the sensors from the Pepperl+Fuchs portfolio are suitable for a wide range of applications in entrance automation ... : since each beam can be individually adjusted to the closing edge, the sensor can be configured for different door widths. Monitoring of Leading Edge and Hinge Edge The AIR30 active infrared scanner is used to monitor the leading and hinge edges of bus ...
See Overview: Pepperl+Fuchs / Visolux offers an extensive range of multi-beam safety light grids Safety light grids are ideal for access protection of palletizing systems, robots, woodworking machine ... amplifier. Different thru-beam sensors may be used as long as each pair consists of a transmitter and a receiver of the same type. Depending on the amplifier, up to 8 light grids can be controlled and monitored by one amplifier. The amplifiers also contain ...
See Overview: Pepperl+Fuchs offers a wide range of panel receptacles for industrial applications ... solution to send signals from the switch cabinet to the field in a fast and flexible way and to economically build field equipment . When needed, service technicians disconnect devices as easily as they were installed. M8, M12, and 7/8 in. connector types ...
Explore the Pepperl+Fuchs knowledge base to learn more about the different versions of inductive sensors ... measurements over a period of eight hours at an ambient temperature of +23 °C ±5 °C and at a constant operating voltage. Response Time According to EN 60947-5-2, the response time is the time required for the proximity sensor to react after the damping element ...
Pepperl+Fuchs’ LoRaWAN based ultrasonic sensor WILSEN is a sturdy solution for fill level monitoring and distance measurement ... range of up to 2500 mm are ideal for compact intermediate bulk containers (IBC) , the WILSEN.sonic version with a detection range of up to 7000 mm is used in larger storage tanks such as the salt silo shown here. Thanks to the high degree of protection ...
21-30/77Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.