Pepperl+Fuchs' Y-splitters help to reliably transmit sensor signals to the mobile crane control panel ... Pepperl+Fuchs' Y-splitters help to reliably transmit sensor signals to the mobile crane control panel... ...
... distance must be avoided. - 30 30 = 30 mm big thread G G = thread S S = stainless steel 60 60 = 60 mm usable thread length - E2E2 = three-wire, DC, PNP, no contact - V1V1 = M12 x 1 device plug for DC sensors Description of the First Section 1. Operating ...
Explore the Pepperl+Fuchs knowledge base to learn more about the electrical connections of inductive sensors ... in the Pepperl+Fuchs accessories range. Inductive sensors with these connection options have one of the following type designations at the end of the type code: V1, V3, V5, V13, V16, V18. Other Connections In addition to other versions, e.g., FASTON® connectors ...
Explore the FAQ in the Pepperl+Fuchs knowledge base to learn more about fault repairs for inductive sensors ... ", "V13", "V16", "V18." AS-Interface Identifier "B3" or "B3B" in the third block of the order designation. Example: NBB15-30GM60-B3B-V1 Other connections Sensors with FASTON® connector "V3" ... "V5" or sensors with solder connection etc. ...
Explore the Pepperl+Fuchs knowledge base to learn more about the power source of two-wire sensors ... , Pepperl+Fuchs offers two-wire sensors that have a particularly low residual current. Example: NBB10-30GS50-Z4L-V1. The "L" in the output name stands for low current. "Closed" Operating State In the "closed" operating state, the switching element ...
For determining the position of AGVs, reliable reference points are needed A rugged and compact RFID system enables precise navigation ... at defined points provide precise absolute position data that serve as reliable reference points. They are detected by an IQT1-FP-R4-V1 compact RFID reader on board the AGV. The control system compares the signal with the data from the sensors used ...
RFID in the high-frequency range (HF) offers an effective solution for load detection, especially for smaller bots Learn how the RFID system offers a targeted and reliable detection, even under diff ... frequency: 13.56 MHz Complies with ISO 15693 Compact housing (80 × 28 × 12 mm) Rugged design Temperature range: –25 °C … +70 °C Degree of protection: IP67 Can be mounted on metal The Benefits The IQH1-F61-V1 read/write head is especially rugged and very ...
Explore the Pepperl+Fuchs knowledge base to learn more about the power source of three-wire sensors ... type with digital current output –EP = sensors with push-pull output Sensors of type –E are available in the following switching element functions: NPN, normally-open (E0, formerly E) NPN, normally-closed (E1) PNP, normally-open (E2) PNP, normally ...
The compact inductive safety sensors enable functional safety in direction detection for the control systems of automated guided vehicles (AGV) Learn more about the application and the sensors that m ... is required. Detection is not affected by dust or dirt . Technical Features Example for NSN4-12GH45-2E2-V1-M1-S2D2: No dead band Can be used with standard metal activators Approvals: Category 2, PL d/SIL 2, E1 LED for switch states and fault indicator OSSD interface TÜV ...
Visit Pepperl+Fuchs’ press room for press releases, media kits and other information about industrial sensors and explosion protection ... Factory Automation) In this press kit: At LogiMAT, Pepperl+Fuchs will present its expanded IO-Link portfolio with the IUT-F191-IO-V1 UHF RFID device, you will also read about the pallet detector that can be flexibly adapted to the conveyor system ...
1-10/22Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.