1 axis acceleration sensor, E1-Type approval, Analog output 4 mA ... 20 mA, Fixed evaluation limits , High shock resistance, Teachable zero point, Measuring range -2 g ... +2 g, Increased noise immunity 100 V/mfa
2 axis acceleration sensor, E1-Type approval, Analog output 4 mA ... 20 mA, Fixed evaluation limits , High shock resistance, Teachable zero point, Measuring range -2 g ... +2 g, Increased noise immunity 100 V/mfa
Not available for purchase: For 8 modules, 24 V DC supply, Supported signal types: DI/DO/AI/TI/AO, Hazardous area: screw terminals, blue, Non-hazardous area: screw terminals, black, Number of modules: 8, Number of channels per module: 2 , 4, Signal type: Universal, Manufacturer: Universal, Control system type: Universalpa
Not available for purchase: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact), Reversible mode of operationpa
Not available for purchase: 1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Voltage output 0/1 V ... 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 30 V DC, Type: 2-wire connection, Type [2]: 3-wire connection, Type [3]: 4-wire connection, Field device: resistance thermometerpa
Not available for purchase: 1-channel isolated barrier, 115 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 103.5 ... 126 V AC , 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact), Reversible mode of operationpa
Not available for purchase: 1-channel isolated barrier, 115 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 103.5 ... 126 V AC , 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)pa
Not available for purchase: 1-channel signal conditioner, Universal usage at different power supplies, Input 2-wire and 3-wire transmitters, current and voltage sources, Current and voltage output, Housing width: 20 mm, Number of channels: 1-channel, Rated voltage: 19 ... 90 V DC / 48 ... 253 V AC, Field device: 2-wire transmitter, Field device [2]: 3-wire transmitter, Field device [3]: current source, Signal: 0/4 ... 20 mA, Signal [2]: 0/2 ... 10 V, Signal: 1 x 0/4 ... 20 mA (current source), Signal [2]: 1 x 0/2 ... 10 Vpa
Not available for purchase: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)pa
Not available for purchase: 2-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 2-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact), Reversible mode of operationpa
Not available for purchase: Switching function: Normally open/closed (NO/NC) programmable, Output type: AS-Interface, Installation: non-flush, Output type: 2-wire, Construction type: VariKont L®, Series: VariKont L®, Operating voltage: 26.5 ... 31.9 V via AS-i bus system, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Housing material: PA, Degree of protection: IP67fa
Pepperl+Fuchsoffers the perfectsensorsolutions for metalformingLearnhow they protectdies, increaseuptime, and trackassets! ... +Fuchsoffer a cost-effective and durableway to protectdieswhiledetectingparts in place. The sensorsembedded in the diemonitor a metalstrip’sprogressionthrough the die and ensurecorrectpartposition at eachstep of the formingprocess. Broken ...
From the batterycell to the batterymodule to the batterypack: Pepperl+Fuchsofferspowerfulsensortechnology for automatedbatteryproduction ... -in referenceprofile. In this way, the SmartRunnerMatcherensureserror-freebatterymodulemanufacturing. Monitoring the ManufacturingProcess The industrialeventcameraVOCenablesevent-drivenvideorecordingsup to 60secondsbefore and after a defined ...
Sensors and systems are essential for automatedprocessplants in hazardousareas and harshenvironmentsPepperl+Fuchsoffers a widerange of solutions, eg for the chemical, pharmaceutical, and oil and gasindustries ... integration into diaphragm and knifegatevalves. Versions with severaltypes of protection (Exia, Exec, Extc, Exic) are available for use in Zones0/20, 1/21, and 2/22 ... more PrecisePositionDetection on ValvePositionIndicatorsInductive ...
Visit the "FunctionalSafetyHub" from Pepperl+Fuchswhere you findsafetyassesseddevices for industrialautomationapplications and alsogetaccess to helpfultools and brochures ... portfolioencompassessensorsolutions of nearlyeveryfunctionalprinciple as well as interfacemodules for everysignaltype. Pepperl+Fuchs’ knowledge in safetystandards and regulationslikeSIL and MachineryDirective is driventhroughcertified ...
Visit the "FunctionalSafetyHub" from Pepperl+Fuchswhere you findsafetyassesseddevices for processindustryapplications and alsogetaccess to helpfultools and brochures ... — without additional wiring. This makesdetection of previouslyundetecteddangerousfailurespossible, easesimplementation of a SIL3loopwhilealsoenablingsafeswitch-on. ApplicationExamplesEmergencyShutdown with HARTPositionersPepperl+Fuchsmeets the boundary ...
Visit the "FunctionalSafetyHub" from Pepperl+Fuchswhere you findsafetyassesseddevices for factoryautomationapplications and alsogetaccess to helpfultools and brochures ... , these sensorscantherefore be used in safetyapplicationsup to PLc/SIL1 or, with a redundantdesign in a two-channelarchitecture, up to PLd/SIL2. Bothsensortypesimpress with their low-interferencefunctionprinciples, highlyreliableCANcommunication ...
From barcodescanners to 2-Dcodereaders and handhelds to specialsolutions—get to knowPepperl+Fuchs' opticalidentificationportfolio ... lasered/needledcodes (DPM). OPC: High-SpeedCodeReader for Print and PaperIndustry The stationary2-Dcodereaders of the OPCseriesreadallcommon1-D and 2-Dcodesreliably and efficiently at closerange of up to 180mm—even on reflectivesurfaces ...
With their flexibility and modularity, the VOS2-Duniversalvisionsensorsoffer the perfectsolution for yourvisionapplicationLearn more about the components and software of the VOSsensorseries ... dynamicallyswitchbetweenjobs—they canalsosave, duplicate and transferjobs to otherdevices. SensorsCameraLensesProtectiveCoversSystemLightingPepperl+Fuchsoffersdevices of the VOSseries in numerousvariants for a widerange of application ...
With SmartRunnertechnology, Pepperl+Fuchscombinestwopowerfultechnologies to offernewapplications for demandingdetectiontasks ... , sensorscan be easilyparameterizedusingDataMatrixcontrolcodes. Once a codehasbeengenerated, userscaneffortlesslyteach-in any number of sensors. Especiallywhenproduction is frequentlyadjusted, users are able to actquickly and flexibly ...
The WCS is designed for applications with extremeambient conditions or especiallylongdistances ... for applications with extremeenvironmental conditions. A ruggedhousing with IP69protectionmakes the readheadresistant to dust, moisture, and shock. This means it canalso be used in environments with high-pressurecleaners or where the WCScomes into contact ...
21-30/911Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.