Single-beam light scanner, Can be used to monitor both main and ancillary closing edges, Closing edge safety on revolving doors and carousel doors, Accurate beam alignment thanks to finely bundled light beam, Background evaluation operating mode: uses the background as a reference for detecting difficult objects, Function: Secure, Sensor principle: Active infrared scanner, Operating voltage: 10 ... 48 V DC / 11 ... 36 V AC, Signal output: relay, 1 NO, Connection: 5 m fixed cablefa
See Overview: The FieldConnex® system offers several versions of standard junction boxes to connect the field devices to the trunk, with connection points ranging from one through twelve field devices ... The FieldConnex® system offers several versions of standard junction boxes to connect the field devices to the trunk, with up to eight connection points for field devices. The choice of the junction box and its location to the field device allows ...
In autonomous transport, the direction of travel and the side areas of AGVs must be monitored in order to avoid any collision with people and objects The USi-safety ultrasonic sensor systems reliably ... in the vehicle control system. The USi-safety system meets the requirements for functional safety according to EN ISO 13849, category 3 PL d. Technical Features Sensing range up to 2500 mm IP protection class: sensor unit IP69/ control interface IP65 Typical ...
See Overview: The industrial tablet thin client extends the Pepperl+Fuchs thin client portfolio with a mobile thin client device The tablet can be easily and quickly integrated into existing networks ... advantages in the field: An eight-generation Intel® Core™ processor plus a widescreen sunlight-readable display ensure smooth and speedy operation at any time. The tablet can be easily and quickly integrated into existing networks via Wi-Fi. Due to wireless ...
See Overview: K System switch amplifiers from Pepperl+Fuchs consist of three primary components: the power supply, the transistor switch amplifier and the output stage Galvanic isolation separates th ... ( NAMUR ). This means the residual voltage in normal operation is approximately 8 VDC and the short circuit current is approximately 8 mA. The switch points are typically between 1.2-2.1 mA. Many Pepperl+Fuchs isolators offer optional lead breakage ...
See Overview: Pepperl+Fuchs offers safety control units for safety light curtains and light grids to form a modular protection system ... SafeBox safety control units are modularly constructed so that up to eight components can be connected to a single control unit. Depending upon application requirements, existing solutions are expanded by connecting additional function modules via ...
See Overview: Pepperl+Fuchs' IO-Link masters facilitate reliable communication between management and sensor/actuator levels ... facilitate reliable, efficient communication between management and sensor/actuator levels as they assume a gateway function between Ethernet and IO‑Link. Up to eight IO‑Link devices may be directly connected—four channels are available for sensors, four ...
See Overview: Pepperl+Fuchs offers optical data couplers and optical data transmission systems Our optical data couplers allow bi-directional communication for storage & retrieval systems, transfer c ... between two stations takes place with infrared light, which is modulated by a data clock. Optical data couplers with many common interfaces used in industry are available. The data transfer takes place either serially or in 8-bit parallel mode. ...
See Overview: Safety through beam sensors from Pepperl+Fuchs form a modular protective system with an operating range of up to 65 meters ... The through-beam photoelectric sensors SLA series is part of a category 2 or 4 self-monitoring photoelectric safety devices per EN 954-1 and EN 61496. It must be used with the SLVA or SC4-8 safety amplifiers. Up to 8 through-beam sensors can ...
The ML100 sensor combines all sophisticated photoelectric functional principles in a simple, rectangular miniature housing design to solve all kinds of demanding automation tasks Discover the versati ... and PCB detection ML100-8-H-250-BU Standard BGS performance for standard applications ML100-8-H-250-RT Infrared (IR) light for non-intrusive object detection ML100-8-H-200-IR Small light spot for small object detection ML100-8-H-100-RT Triple light spots ...
Pepperl+Fuchs' Y-splitters help to reliably transmit sensor signals to the mobile crane control panel ... of control. The goal Individual signals from the eight sensors monitoring the supports must be connected logically and transmitted to the crane’s control panel. Conventional wiring methods, such as connecting sensors in series and joining them in terminal ...
11-20/76Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.