Subrack for K-System, Replacement for subrack of the E-System, Max. 33 slots for isolators, Long design (300 mm mounting depth), Connection via marshalling patchboards, Partial and combined assembly possible, Complete wiring according to customer requirements, Allows to retain cable routing in the switch cabinet, No structural changes on the switch cabinet requiredpa
Subrack for K-System, Replacement for subrack of the E-System, Max. 33 slots for isolators, Long design (300 mm mounting depth), Connection via marshalling patchboards, With middle sheet and cable duct, Partial and combined assembly possible, Complete wiring according to customer requirements, Allows to retain cable routing in the switch cabinet, No structural changes on the switch cabinet requiredpa
Subrack for K-System, Replacement for subrack of the E-System, Max. 33 slots for isolators, Short design (211 mm mounting depth), Connection via terminal blocks, Partial and combined assembly possible, Complete wiring according to customer requirements, Allows to retain cable routing in the switch cabinet, No structural changes on the switch cabinet requiredpa
Subrack for K-System, Replacement for subrack of the E-System, Max. 33 slots for isolators, Short design (211 mm mounting depth), Connection via marshalling patchboards, Partial and combined assembly possible, Complete wiring according to customer requirements, Allows to retain cable routing in the switch cabinet, No structural changes on the switch cabinet requiredpa
Not available for purchase: 2-channel isolated barrier, 24 V DC supply, Input for approved dry contacts or SN/S1N sensors, Active voltage output, Relay outputpa
Automatic doors in busses and trains require door edge protection to prevent the unintentional trapping of passengers Photoelectric sensors from Pepperl+Fuchs are used to solve this application ... limited space for accommodating the sensors depending on the door design. Pepperl+Fuchs offers two different solutions: Corner arrangement PROSCAN Solution 1: Here, two multi-ray photoelectric sensors "PROSCAN-T" are integrated into the upper door corners ...
In deep-freeze warehouses that handle frozen food products, goods are transported on trays Withstanding ambient temperatures from -35 °C to +45 °C, the VB14N-T barcode scanner identifies barcodes that are attached to the tray Learn more abouit it ... effect on the readability of the codes themselves. For minimal error rates and short throughput times, difficult-to-read codes must always be reliably recognized, even at high speeds. The Solution VB14N-T barcode scanner is made for temperatures down ...
See Overview: Pepperl+Fuchs sockets, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A The devices provide IP66 protection even when plugged in due to the bay ... Pepperl+Fuchs sockets, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A. The devices provide IP66 protection even when plugged in due to the bayonet connector. Sockets PS*-4* Ex de and Ex t certified sockets ...
See Overview: Pepperl+Fuchs plugs, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A Due to low contact resistance, the devices require a low insertion and re ... *-7* Ex de and Ex t certified plugs, made from polyamide. Suited for installation in Zone 1, Zone 2, Zone 21 and Zone 22 environments. Degree of protection IP66 when plugged into socket and secured by means of bayonet catch. ...
See Overview: Pepperl+Fuchs offers a wide range of sensor-actuator splitters for industrial applications ... by its high versatility and wide variety: your choices include many combinations of M8 and M12 connectors in different housing designs. Fixed T- or Y-piece versions are available as well as flexible Y-connectors with cast-on cables of variable lengths ...
Explore the Pepperl+Fuchs knowledge base to learn more about the power source of two-wire sensors ... from www.pepperl-fuchs.com . Sensor Connection—Example The following diagram is a sample circuit of a safety sensor with the KFD2-SH-EX1. The implemented safety logic should be considered functionally independent of the galvanic isolation for establishing intrinsic ...
See Overview: Pepperl+Fuchs offers a wide range of frequency converters for our K-System isolated barriers ... on the front of the unit the setting can also take place using a PC. Versions with wide range power packs are also available for international application. Five device versions are available: Downtime monitor KFD2-SR2-**2.W.SM The KFD2-SR2-Ex2.W.SM downtime ...
Pepperl+Fuchs is expanding its portfolio of universal isolated barriers with the HiC2422 intrinsic safety barrier ... of control systems. Equivalent devices are also available in the K-System portfolio, which is a DIN rail-mounted solution. These are the KCD2-SCS-Ex2 as an isolated barrier for intrinsically safe signals and the KCD2-SCS-2 for signals to or from the non ...
See Overview: Pepperl+Fuchs offers a large portfolio of external system lighting for the universal vision sensors with C-mount connection Get an overview of the ring, spot, bar, and area lighting ... with a suitable ring, spot, bar or area lighting . Due to the T-cable set , lighting and sensor can be connected quickly and easily via plug & play . Compared to sensors with integrated lighting, external system lighting offers greater flexibility in solving ...
Visit Pepperl+Fuchs’ press room for press releases, media kits and other information about Industrial Sensors and Explosion Protection ... e or familiarize yourself with the R20x family of compact photoelectric distance sensors. (March 2024) Download Now Press Kit: R+T 2024 (Division Factory Automation) In this press kit: For the first time, Pepperl+Fuchs will be exhibiting at R+T ...
1-10/26Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.