1-channel signal conditioner, 24 V DC supply (Power Rail), Input for 2-wire SMART transmitters and current sources, Signal splitter (1 input and 2 outputs), Dual output 0/4 mA ... 20 mA or 0/1 V ... 5 V, Terminal blocks with test sockets, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, HART communication, Test sockets, Safety Integrity Level (SIL): SIL 2, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DCpa
1-channel signal conditioner, 24 V DC supply (Power Rail), Input for 2-wire SMART transmitters and current sources, Output for 4 mA ... 20 mA or 1 V ... 5 V, Housing width 12.5 mm, Up to SIL 2 acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, HART communication, Safety Integrity Level (SIL): SIL 2, Rated voltage: 19 ... 30 V DC, Field device: 2-wire transmitter, Field device [2]: current source, Input signal: 4 ... 20 mA limited to approx. 26 mApa
1-channel signal conditioner, 24 V DC supply (Power Rail), Input for 2-wire SMART transmitters and current sources, Output for 4 mA ... 20 mA or 1 V ... 5 V, Housing width 12.5 mm, Connection via spring terminals with push-in connection technology, Up to SIL 2 acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, HART communication, Safety Integrity Level (SIL): SIL 2, Rated voltage: 19 ... 30 V DC, Field device: 2-wire transmitter, Field device [2]: current sourcepa
A combination of a pressure transmitter with a transmitter power supplyl is ideally suited for constantly monitoring the oil pressure in lubrication cycles ... power supply unit provides an intrinsically safe power supply and ensures that the data is reliably transmitted. KCD2-STC-Ex1.ES modules are typically used for this application. They are suitable for applications up to SIL 3 in accordance with IEC/EN ...
Visit the "Functional Safety Hub" from Pepperl+Fuchs where you find safety assessed devices for process industry applications and also get access to helpful tools and brochures ... Functional Safety Hub | Process Automation Functional Safety Products Applications Literature and Tools Events and Trainings Deep Dive Contact Us No Compromises! The I-think-I'd-rather-not-crash-airbag? A bit of safety is not enough—rather trust ...
The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas Learn more about the USi-safety ultrasonic sensor ... the system with single-fault tolerance in accordance with EN ISO 13849-1. In addition to the connections for the ultrasonic sensor units and the safe, short-circuit, and crossed-circuit monitored OSSD outputs, there is an input for a temperature sensor ...
See Overview: Pepperl+Fuchs offers 24 VDC, 115 V AC and 230 VAC power supplies for our FB Zone 1 remote I/O systems ... and com units/gateways mounted on the corresponding backplane. The FB remote I/O power supplies feature galvanic isolation to mains power and can be operated in redundancy mode . ...
See Overview: Pepperl+Fuchs offers analog output modules for our FB Zone 1 remote I/O systems, 1- and 4-channel to control 0/4-20 mA HART positioners, proportional valves and indicators ... in the following versions: 1-channel versions address the needs of users who value system granularity and easy commissioning. 4-channel versions ensure the highest possible utilization of backplanes for module connection and enable compact remote I/O solutions ...
See Overview: Pepperl+Fuchs offers temperature input modules for our FB Zone 1 remote I/O systems 1- and 4-channel temperature input modules for Pt 100 resistance thermometers, slide wire sensors, thermocouples and mV signals ... Temperature measurement is one of the most safety-critical applications in process automation—especially in explosion-hazardous areas . For this challenging task, Pepperl+Fuchs’ FB system remote I/O solution includes temperature inputs ...
See Overview: Pepperl+Fuchs offers digital output modules for our FB Zone 1 remote I/O systems, 1-channel with position feedback and 8-channel for valves, LEDs and audible alarms ... Pepperl+Fuchs provides digital output modules for control of intrinsically-safe solenoid valves, LED clusters, beacons, horns, or other standard switching functions. As part of the FB system remote I/O solution , these digital outputs feature ...
See Overview: Pepperl+Fuchs offers field units and redundant field units for our FB Zone 1 remote I/O systems ... stainless steel and features slots for 24 double-width or 48 single-width I/O modules in an 800 x 1000 x 300 mm enclosure. It is suitable for use in a -20 °C … +40 °C temperature range (depending on power supply) and a rated voltage of 24 V DC/115 V AC/230 V ...
See Overview: Pepperl+Fuchs offers voltage input modules for our FB Zone 1 remote I/O systems 1-channel for connecting analog input signals with a voltage range of 0-10V ... of protection Ex ia terminals and are suited for use in Zone 1 explosion-hazardous areas . As 1-channel versions , they are perfect for users who value system granularity and easy commissioning. Galvanic isolation separates the inputs from bus and power ...
See Overview: Pepperl+Fuchs offers relay output modules for our FB Zone 1 remote I/O systems 2-, 4- and 8- channel modules for valves, solenoid valves, optical and audible alarms ... the highest flexibility for individual configuration of their remote I/O system . Galvanic isolation separates the modules’ outputs from bus and power. In addition, the relay outputs are hot-swappable, which allows quick and easy module replacement ...
1-10/341Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.