Not available for purchase: 1-channel isolated barrier, 24 V DC supply (Power Rail), Voltage input 0 V ... 10 V, Voltage output 0 V ... 10 V, Accuracy 0.1 %, Up to SIL 2 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the field, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 35 V DC, Signal: 1 x 0 ... 10 V, Signal [2]: 1 x 0 ... 5 V, Signal [3]: 1 x 1 ... 5 V, Signal [4]: 1 x 2 ... 10 V, Field device: 1 x I/P converters, Field device [2]: 1 x positionerpa
Fire protection on ships is a very current and important issue Intelligent safety relays guaranteereliable switching processes and additional diagnostic functions Learn more about the latest additio ... or opens the circuit accordingly. Defective contacts are detected, and a fault is reported to the control system. After switching three times, the relay module is fully tested without any additional effort. The modules in the KFD2-RSH series also provide ...
Faulty fuel lines are common causes of fires in engine rooms KFD2-RSH-1*D* safety relays with dual redundant contacts from Pepperl+Fuchs enable the immediate shutdown of the fuel supply and offer maximum functional safety Learn more ... fuel, it is therefore important to immediately shut down the fuel pumps before any other measures are taken. This process must be fully automatic and take place properly even under critical operating conditions. The Solution KFD2-RSH-1.*D.* safety ...
Pepperl+Fuchs' VisuNet FLX line offers you the freedom and flexibility to customize an HMI solution that exactly fits your needs-whether you are looking for a full HMI system, panel PC, thin client or ... (32 … 104 °F) VisuNet FLX Extended Temperature Range RM-320S-*B-* (Remote Monitor) PC-320S-*B-* (Industrial PC) DM-320S-*B-* (Direct Monitor) 21,5” (16:9, Full HD: 1920x1080 px), 300 cd/m², optically bonded Non-Ex ATEX/IECEx Zone 2/22 UL Class I, II ...
The ETS safety relays (energized-to-safe) from Pepperl+Fuchs enable safe triggering of fire alarms and automatic extinguishing system in the event of a fire outbreak Learn more about the application ... in the event of a fire outbreak is safe signal transmission supplemented by galvanic isolation between the control and field circuits. The ETS safety relays (energized-to-safe) from Pepperl+Fuchs are designed precisely for this purpose. The KFD2-RSH-1.2E.L ...
See Overview: The K-System HART Multiplexer from Pepperl+Fuchs works as a master/slave system When fully equipped, one K-System HART Multiplexer can drive up to 256 HART field devices ... The K-System HART Multiplexer works as a master/slave system. Up to 15 additional slaves can be connected to the master, each of which can support another 16 channels. When fully equipped, one K-System HART Multiplexer can drive up to 256 HART field ...
See Overview: Pepperl+Fuchs offers a wide range of frequency converters for our K-System isolated barriers ... on the front of the unit the setting can also take place using a PC. Versions with wide range power packs are also available for international application. Five device versions are available: Downtime monitor KFD2-SR2-**2.W.SM The KFD2-SR2-Ex2.W.SM downtime ...
See Overview: Our Pepperl+Fuchs Bebco EPS 1000 series Type Z purge system is suitable for Class I, Division 2 to non-hazardous area applications & Class II, Division 2 to non-hazardous area applicatio ... : Class I Enclosure Volumes ≤ 2 ft3 and Class II Enclosure Volumes ≤10 ft3 , WPS and WPSA 1011 : Class I Enclosure Volumes ≤ 2 ft3 and Class II Enclosure Volumes ≤10 ft3 1012 : Class I Enclosure Volumes ≤ 15 ft3 ...
The Windows-based devices of the Tab-IND series are available with display sizes of 8 and 10 inch for use in non-ex applications, including intra- and transport logistics Learn more about the rugged ... devices are equipped with a 13 MP camera and a bright display with 700 and 800 cd/m² , which can also be operated with a pen or gloves. With a temperature range of -20 ... +50 °C , the tablets are equally suitable for industrial use and outdoor ...
... -flush sensors can be replaced with flush sensors, but not the other way round. 1515 = 15 mm switching distance The minimum distance must be observed, otherwise the sound will reach the sensor too quickly and the reaction time will be too low. This blind ...
Signal conditioners guarantee dependable conversion and transmission of signals in the vulcanization process during tire manufacturing Learn more about the application ... is that this module is particularly robust in harsh ambient conditions, especially at high ambient temperatures. When using a normal thermometer, the universal temperature converter KFD2-UT2-2 is also suitable. There is an additional advantage to this module: It can ...
1-10/30Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.