Not available for purchase: 1-channel isolated barrier, 24 V DC supply (Power Rail), Voltage input 0 V ... 10 V, Current output 0 mA ... 20 mA, Accuracy 0.1 %, Up to SIL 2 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the field, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 35 V DC, Signal: 1 x 0 ... 10 V, Signal [2]: 1 x 2 ... 10 V, Field device: 1 x I/P converters, Field device [2]: 1 x positioner, Signal: 1 x 0 ... 20 mApa
The VisuNet RM Shell 6 with additional Control Center software is the latest firmware generation for remote monitors and box thin clients Learn more about the innovative software ... for Remote Monitors and Box Thin Clients The VisuNet RM Shell 6 with additional Control Center software is the latest firmware generation for remote monitors (RM) and box thin clients (BTC). The innovative HMI firmware allows for remote managing of multiple ...
Fire protection on ships is a very current and important issue Intelligent safety relays guaranteereliable switching processes and additional diagnostic functions Learn more about the latest additio ... or opens the circuit accordingly. Defective contacts are detected, and a fault is reported to the control system. After switching three times, the relay module is fully tested without any additional effort. The modules in the KFD2-RSH series also provide ...
The Tab-Ex 04 Pro from Pepperl+Fuchs is the world's first 5G Android™ tablet with a 10-inch display Learn more about the next-generation mobility device for use in Zone 2/22 and Division 2 hazardous ... Octa-Core 4x 2.4 GHz + 4x 1.8 GHz processor with 4 GB RAM or 6 GB RAM depending on the model. This provides the necessary computing power to fully benefit from the higher data transmission speed. In addition to the 128 GB internal memory, the storage ...
Faulty fuel lines are common causes of fires in engine rooms KFD2-RSH-1*D* safety relays with dual redundant contacts from Pepperl+Fuchs enable the immediate shutdown of the fuel supply and offer maximum functional safety Learn more ... fuel, it is therefore important to immediately shut down the fuel pumps before any other measures are taken. This process must be fully automatic and take place properly even under critical operating conditions. The Solution KFD2-RSH-1.*D.* safety ...
Pepperl+Fuchs' VisuNet FLX line offers you the freedom and flexibility to customize an HMI solution that exactly fits your needs-whether you are looking for a full HMI system, panel PC, thin client or ... (32 … 104 °F) VisuNet FLX Extended Temperature Range RM-320S-*B-* (Remote Monitor) PC-320S-*B-* (Industrial PC) DM-320S-*B-* (Direct Monitor) 21,5” (16:9, Full HD: 1920x1080 px), 300 cd/m², optically bonded Non-Ex ATEX/IECEx Zone 2/22 UL Class I, II ...
Explore the Pepperl+Fuchs knowledge base to learn more about the power source of two-wire sensors ... , the sensor must be operated on an approved safety switch amplifier from Pepperl+Fuchs (e.g., KFD2-SH-EX1). Observe the "exida Functional Safety Assessment" document, which belongs to this sensor and is available as part of the product documentation ...
See Overview: Pepperl+Fuchs offers RFID read/write devices and RFID tags to provide you with the right solution for industrial identification system applications ... For far field RFID (868 MHz), the read/write distances reach a maximum of six meters ...
In this section you find information about the handling of product change and discontinuation (PCN) ... at Pepperl+Fuchs in case of component changes. The supplier is therefore obligated to notify Pepperl+Fuchs at the earliest possible time, but at least six months before the planned change. The letter of discontinuance must contain the following ...
The ETS safety relays (energized-to-safe) from Pepperl+Fuchs enable safe triggering of fire alarms and automatic extinguishing system in the event of a fire outbreak Learn more about the application ... in the event of a fire outbreak is safe signal transmission supplemented by galvanic isolation between the control and field circuits. The ETS safety relays (energized-to-safe) from Pepperl+Fuchs are designed precisely for this purpose. The KFD2-RSH-1.2E.L ...
See Overview: To achieve the optimum field of view size at different measuring distances, Pepperl+Fuchs offers matching precision lenses for the C-mount variants of the VOS series Get an overview ... To achieve the optimum field of view at different distances, Pepperl+Fuchs offers matching precision lenses for the C-mount variants of the VOS series. Different focal lengths of 6 mm for short distances (for large field of view) and up to 50 mm ...
1-10/67Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.