Not available for purchase: Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M8, Construction type: Cylindrical, thread, Series: M8 x 1, Switching frequency: Released for special gear-wheel (customer specified), Type of voltage: DC, Connection type: V1-connector, Housing material: brass, nickel-plated, Degree of protection: IP67, ATEX marking: [exsign] II 2G EEx ia IIC T6fa
Explore the Pepperl+Fuchs knowledge base to learn more about the electrical connections of inductive sensors ... in the Pepperl+Fuchs accessories range. Inductive sensors with these connection options have one of the following type designations at the end of the type code: V1, V3, V5, V13, V16, V18. Other Connections In addition to other versions, e.g., FASTON® connectors ...
See Overview: Pepperl+Fuchs offers a complete line of AS-Interface inductive sensors (proximity switches) ... to function correctly within the assured operating distance s a = (0 to 0.81) • s n . If the actuating element is located between s a and the actual operating distance s r , a failure warning display bit (data bit 1) is set so that maladjustments can ...
An inductive sensor switches at a certain distance from the metallic object This distance is referred to as the "operating distance" Learn more about this key characteristic ... The actuator dimensions must therefore be 18 x 18 x 1 mm. Example 2 Sensor M18 Operating distance 8 mm 3 x operating distance = 24 mm > sensor diameter The actuator dimensions must therefore be 24 x 24 x 1 mm. Operating Distance ("Rated Operating Distance") s n ...
RFID in the high-frequency range (HF) offers an effective solution for load detection, especially for smaller bots Learn how the RFID system offers a targeted and reliable detection, even under diff ... . The sensors must be able to withstand both thermal and mechanical stress, and must not be affected by EMC interference. The Solution IQH1-F61-V1 read/write head RFID in the high-frequency range (HF) offers an effective solution for load detection , especially ...
Learn more about radar frequency bands and different types of radar systems ... for more complex and high-resolution tasks in level measurement in closed containers or tanks. The N-band (122 GHz) , on the other hand, is preferred in measurement technology: radar modules in this frequency range can penetrate dry, non-conductive materials well ...
See Overview: Pepperl+Fuchs offers com units for our LB Zone 2 remote I/O systems ... and NAMUR sensors, mechanical contacts, power relays, horns, or alarm LEDs . All units feature HART support to transfer diagnostic information to the control side, and easy online parameterization via DTM. Due to permanent self-monitoring , safe operation ...
See Overview: Com units for PROFIBUS and MODBUS RTU - Connect Remote I/O to Control System/ PLC/ PC ... information to the control side, and easy online parameterization via DTM. Due to permanent self-monitoring , safe operation is ensured at all times. The com units are hot-swappable during maintenance without having to shut down the whole system. Additionally, they support ...
Explore the Pepperl+Fuchs knowledge base to learn more about the power source of two-wire sensors ... as intrinsically safe. Example: NAMUR Sensor Versions NAMUR sensors are marked with the following in the third block of the Pepperl+Fuchs order designation: –N = continuous distance/current characteristic or –N0 = non-continuous distance/current characteristic ...
Explore the FAQ in the Pepperl+Fuchs knowledge base to learn more about fault repairs for inductive sensors ... " in the second block of the order designation. Example: NBB10-30GKK-WS Fixed cable Sensor without connection identifier at the end of the order designation. Connector One of the following connector identifiers at the end of the order designation: "V1", "V3", "V5 ...
Pepperl+Fuchs has designed a custom RFID solution for tire building machines and cap strip machines ... for detection of semi-finished goods on bobbins in cap strip and tire building machines . It is a challenging application, as the metal bobbin fixtures are located within the field of the RFID read/write device. Due to this proximity, wireless communication ...
11-20/270Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.