Not available for purchase: Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Degree of protection IP67, Integrated function display, Operating mode: can be selected with or without start/restart disable, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Safety output: 2 relay outputs, force-guided NO-contactfa
See Overview: Pepperl+Fuchs’ FOUNDATION Fieldbus H1 segment protectors offer short-circuit protection to the trunk line Field instruments installed in Zone 2/ Div 2 are connected to segment protecto ... The Segment Protector R-SP-E12 can supply power to Ex d field devices . The Segment Protector and the instrument can be installed in Zone 1. ...
With a range of up to 300 meters, the LS682 data coupler enables reliable wireless data transfer in large-scale plants like in high bay warehouses Learn more about the application and the completely wear-free and wireless product ... couplers transmit process data in high bay warehouse from 0 m up to a range of 300 m . This optimizes storage utilization and offers a stable, reliable solution for large-scale warehouses . Optical data transfer is unaffected by environmental influences ...
The optical data couplers LS682 and LS684 give your application increased range, greater stability, and maximized uptime They allow stable data transmission over a distance from 0 to 300 m Virtually convince yourself of their easy handling ... to transmit process data quickly and completely wear-free. Mounted directly on a stacker crane, the optical data coupler ensures stable data transmission over a distance of up to 300 m at a constant rate of 100 Mbit/s. In this way, the LS682 helps to prevent ...
See Overview: Each H-System HART Multiplexer (HID MUX 2700) from Pepperl+Fuchs provides communication to 32 HART devices This allows up to 992 field devices to be addressed via one RS485 interface with 31 H-System HART Multiplexers ... Each H-System HART Multiplexer (HID MUX 2700) provides communication to 32 HART devices . This allows up to 992 field devices to be addressed via one RS485 interface with 31 H-System HART Multiplexers. ...
... ) Operating distance of a single sensor, measured under specified conditions. cf. EN 60947-5-2 Effective operating distance (s r ) Operating distance of a single proximity sensor, which is measured at a specified temperature and voltage, and in specified ...
See Overview: The K-System HART Multiplexer from Pepperl+Fuchs works as a master/slave system When fully equipped, one K-System HART Multiplexer can drive up to 256 HART field devices ... devices. This allows up to 7936 field devices to be addressed through one RS485 interface with 31 K-System HART Multiplexers. ...
See Overview: Pepperl+Fuchs offers bulk raw cable in industrial quality from German and European cable production, which is ideally suited for use with field-assembled connectors Learn more ... PUR-A and POC cables High-grade PUR-R cables for use in robotics UV-resistant PUR-O cables for outdoor use CAN cables for indoor and outdoor applications Ethernet and fieldbus cables AS-Interface profile cables ...
An inductive sensor switches at a certain distance from the metallic object This distance is referred to as the "operating distance" Learn more about this key characteristic ... within the operating voltage range Within the specified installation conditions 0.9 · s n ≤ s r ≤ 1.1 · s n Usable Operating Distance s u The usable operating distance s u is the operating distance of a single sensor measured under the following ...
Visit Pepperl+Fuchs’ press and media center for press releases, media kits and other company information ... building, brightly illuminated at night. Formats: TIFF/CMYK and JPG/RGB; 12 cm width, 300 dpi each. Download Now (PDF, 5810 KB) Download: Product group overview for industrial sensors This portfolio contains high-resolution images of the Pepperl+Fuchs ...
See Overview: Pepperl+Fuchs/ Visolux offers photoelectric sensors for industrial doors and automatic gates ... must be used in order to eliminate the risk of injury. The sturdy series 29 and 31 photoelectric sensors are designed to make automatic gate openers safe. A variety of operating principles make them ideally suited for gate control in harsh environments. ...
1-10/51Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.