Explore the Pepperl+Fuchs knowledge base to learn more about the communication interfaces of inductive sensors ... , this can result in the following effect: The galvanically isolated additional supply of the Class B port (pins 3 and 5) is coupled with the standard IO-Link cables via such additional lines. This may affect the function of the sensor. In a worst-case ...
Explore the Pepperl+Fuchs knowledge base to learn more about the installation conditions of inductive sensors ... -mounted versions. Left: flush-mountable inductive sensor, correctly installed Right: nonflush-mountable inductive sensor, correctly installed A = 2 x operating distance B = 3 x housing diameter of the sensor D = housing diameter of the sensor F = minimum ...
In order to ensure personnel protection, operator intervention in potentially hazardous areas of packaging machines must be prevented Learn more about our safety solution based on standard sensors ... the packaging industry. For example, due to a change in the standard (EN 1010-1:2004 changed to EN ISO 12643-4 ), operator intervention in potentially hazardous areas of packaging machines must be prevented in the future with PL d instead of PL b in order ...
Explore the FAQ in the Pepperl+Fuchs knowledge base to learn more about fault repairs for inductive sensors ... ", "V13", "V16", "V18." AS-Interface Identifier "B3" or "B3B" in the third block of the order designation. Example: NBB15-30GM60-B3B-V1 Other connections Sensors with FASTON® connector "V3" ... "V5" or sensors with solder connection etc. ...
Pepperl+Fuchs' VisuNet FLX line offers you the freedom and flexibility to customize an HMI solution that exactly fits your needs-whether you are looking for a full HMI system, panel PC, thin client or ... (32 … 104 °F) VisuNet FLX Extended Temperature Range RM-320S-*B-* (Remote Monitor) PC-320S-*B-* (Industrial PC) DM-320S-*B-* (Direct Monitor) 21,5” (16:9, Full HD: 1920x1080 px), 300 cd/m², optically bonded Non-Ex ATEX/IECEx Zone 2/22 UL Class I, II ...
Learn how automated guided vehicles (AGVs) can precisely orientate and navigate with the help of photoelectric sensors ... calculated routes while avoiding any obstacles. The Goal AGVs should accurately navigate from point A to point B. The sensor technology used for this has to be able to immediately supply reliable orientation data to the vehicle control system while the AGV ...
With Ethernet IO modules from Pepperl+Fuchs reduce communication expenditure, expand efficiency and support a uniform system design Learn more about the fieldbus modules ... . Supports 8 IO-Link channels for sensors (Type A) and actuators (Type B) Is based on simple and economical wiring with unshielded standard cables Is future-proof thanks to IO-Link standard IEC 61131-9 Decentralized Logic Simplifies PLC Software With local ...
... / non-flush mount) A = 2 x switching distance B = 3 x diameter D = sensor diameter F = distance between sensors 4. Switching distance The switching distance is the most important parameter of a proximity switch and depends mainly on sensor size (coil ...
The WILSEN platform offers three LoRa-based, battery-powered sensor solutions for a wide range of M+O applications ... for this purpose. In this service, downlink payloads can be created as hex codes with just a few clicks and transmitted directly to message queues in the IoT platforms TTN (The Things Network) and ChirpStack (v3 and v4) via the Network API Key. Alternatively ...
Explore the Pepperl+Fuchs knowledge base to learn more about special types of inductive sensors ... Inductive slot sensors with a slot width of 3.5 mm Sensors from the V3 product family: cubic sensors in the standard dimensions of mechanical microswitches Standard DC versions or NAMUR versions with an extended temperature range of up to -50 °C ... +100 °C ...
11-20/25Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.