Serviceline Industrial Sensors
Serviceline Explosion Protection

Retroreflective sensor RLK29-55-5060

RLK29-55-5060
  • Robust, compact photoelectric sensor for single-beam gate protection
  • High detection ranges achievable
  • 2500 V Proof voltage between the relay connection terminals and the device electronics
  • Not sensitive to ambient light, even with energy saving lamps
  • Version with accessories in scope of delivery

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  RLK29-55-5060

Product Description
Robust, compact, long range photoelectric sensors for detecting people, objects and vehicles
General specifications
Effective detection range0 ... 12 m
Reflector distance0.04 ... 12 m
Threshold detection range14 m
Reference targetreflector C110-2 Diameter: 84 mm , included with delivery
Light sourceLED
Light typemodulated visible red light , 640 nm
Diameter of the light spotapprox. 35 mm at a distance of 12 m
Angle of divergence± 1 °
Ambient light limit90000 Lux
Functional safety related parameters
MTTFd1460 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLED red
illuminates: when beam is free
flashes: when level falls below function reserve
off: when beam is interrupted
Electrical specifications
Operating voltage24 ... 230 V AC/DC
Ripple10 %
No-load supply current≤ 8.5 mA
Power consumption0.2 W at 24 V DC , 1.8 W at 230 V AC 3 VA
Output
Switching typelight-on
Signal outputRelay, 1 alternator
Switching voltage230 V AC
Switching currentmax. 2 A
Switching frequency7 Hz
Response time50 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
CE conformityyes
EAC conformityTR CU 020/2011
TR CU 004/2011
UL approvalcULus Listed
Caution: This equipment is considered as open-type equipment. It must be mounted within an enclosure, that is suitably designed for protection against internal fire and personal injury resulting from accessibility to live parts according UL 508.
CCC approvalCertified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-30 ... 70 °C (-22 ... 158 °F)
Mechanical specifications
Degree of protectionIP67
Connectionterminal compartment
Material
HousingPlastic ABS, flame resistant
Optical faceplastic
Massapprox. 200 g
NoteSafety fuse ≤ 2 A (slow-blow) according to IEC 60127-2 Sheet 1
Recommendation: after a short circuit, check that the device is functioning correctly.

Documents: RLK29-55-5060

Product informationLanguageFile TypeFile Size
Opuscolo - Sensori per porte, cancelli e ascensoriITAPDF1891 KB

Approvals+Certificates: RLK29-55-5060

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-0545APDF152 KB
Certificates
Canada USA UL Ordinary Location20170307-E87056PDF403 KB

Associated Products: RLK29-55-5060

Accessories
Mounting bracket fa
Mounting bracket for rear wall mountingfa
Mounting bracket for rear wall mountingfa
Mounting bracket fa
Reflective tape 100 mm x 100 mmfa
Reflector, round ø 84 mm, central mounting holefa
Reflector, rectangular 182 mm x 42 mm, mounting holesfa
Reflector, rectangular 60 mm x 18 mm, mounting holesfa
Reflector, rectangular 84.5 mm x 84.5 mm, mounting holesfa
Reflector with mounting holesfa
Reflector, rectangular 51 mm x 61 mm, mounting holes, fixing strapfa

Function: RLK29-55-5060

Series 29 is a range of low-cost and, most importantly, reliable photoelectric sensors for monitoring industrial doors, elevators, and automatic gates. Their high degree of protection makes them the ideal solution for tasks outdoors and at thresholds, and in harsh environments. These "universal-voltage sensors" can be operated with any supply voltage from 24 V to 240 V, and with direct current or alternating current.