Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Retroreflective sensor OBR7000-R101-2EP-IO-V31-1R-IR

OBR7000-R101-2EP-IO-V31-1R-IR
  • Miniature design with versatile mounting options
  • Extended temperature range
    -40°C ... 60°C
  • High degree of protection IP69K
  • IO-link interface for service and process data

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of OBR7000-R101-2EP-IO-V31-1R-IR

Product Description
Retroreflective sensor
General specifications
Effective detection range0 ... 7 m
Reflector distance0.03 ... 7 m
Threshold detection range10 m
Reference targetH85-2 reflector
Light sourceLED
Light typemodulated infrared light 850 nm
LED risk group labellingexempt group
Polarization filterno
Diameter of the light spotapprox. 100 mm at a distance of 1 m
Angle of divergence5.4 °
Ambient light limitEN 60947-5-2
Functional safety related parameters
MTTFd724 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Function indicatorYellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Control elementsLight-on/dark-on changeover switch
Control elementssensitivity adjustment
Parameterization indicatorIO link communication: green LED goes out briefly (1 Hz)
Electrical specifications
Operating voltage10 ... 30 V DC
Ripplemax. 10 %
No-load supply current< 25 mA at 24 V supply voltage
Protection classIII
Interface
Interface typeIO-Link ( via C/Q = pin 4 )
Transfer rateCOM 2 (38.4 kBaud)
IO-Link Revision1.1
Min. cycle time2.3 ms
Process data witdhProcess data input 2 Bit
Process data output 2 Bit
SIO mode supportyes
Device ID0x110201 (1114625)
Compatible master port typeA
Output
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
/Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA , resistive load
Usage categoryDC-12 and DC-13
Voltage drop≤ 1.5 V DC
Switching frequency1000 Hz
Response time0.5 ms
Conformity
Communication interfaceIEC 61131-9
Product standardEN 60947-5-2
Approvals and certificates
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Ambient conditions
Ambient temperature-40 ... 60 °C (-40 ... 140 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width13.9 mm
Housing height41.4 mm
Housing depth18.3 mm
Degree of protectionIP67 / IP69 / IP69K
ConnectionM8 x 1 connector, 4-pin
Material
HousingPC (Polycarbonate)
Optical facePMMA
Massapprox. 10 g

Approvals+Certificates: OBR7000-R101-2EP-IO-V31-1R-IR

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-1000DPDF162 KB
Certificates
Canada USA UL Ordinary Location20170306-E87056PDF407 KB
Pepperl+Fuchs IO-Link Manufacturer DeclarationCERT-4432PDF228 KB

Software: OBR7000-R101-2EP-IO-V31-1R-IR

Device type managersRelease InfoFile TypeFile Size
IODD for OBR R100/R101 series / IODD für OBR R100/R101 Serie1.00.002 / 2018-08-15ZIP631 KB

Associated Products: OBR7000-R101-2EP-IO-V31-1R-IR

Accessories

Female cordset, M8, 4-pin, PUR cablefa

Female cordset, M8, 4-pin, PUR cablefa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
Mounting Clampfa
Mounting Clampfa
Mounting Clampfa
Mounting bracket fa
Mounting bracket fa
Mounting bracket fa
Reflective tape 100 mm x 100 mmfa
Reflector with screw fixingfa
Reflector, rectangular 51 mm x 61 mm, mounting holes, fixing strapfa
Reflector, rectangular 84.5 mm x 84.5 mm, mounting holesfa
Reflector, rectangular 60 mm x 19 mm, mounting holesfa