Subrack K-RACK.2.**.*.*.WW.01-Y*******
- Subrack for K-System
- Replacement for subrack of the E-System
- Max. 33 slots for isolators
- Short design (211 mm mounting depth)
- Connection via marshalling patchboards
- Partial and combined assembly possible
- Complete wiring according to customer requirements
- Allows to retain cable routing in the switch cabinet
- No structural changes on the switch cabinet required
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of K-RACK.2.**.*.*.WW.01-Y*******
| Slots | ||
|---|---|---|
| Supply | max. 2 , see section application | |
| Isolators | max. 33 , see section application | |
| Supply | ||
| Connection | isolator power supply via marshalling patchboards or Power Rail | |
| Nominal voltage | 24 V DC , in consideration of rated voltage of used isolators | |
| Fusing | max. 4 A , in consideration of rated voltage of used isolators | |
| Redundancy | redudnancy possible, depends on the used power feed module | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61439-1:2011 (J.9.4.2 b) , EN 61439-2:2011 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN IEC 63000:2018 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Connection | ||
| Field side | marshalling patchboards | |
| Control side | marshalling patchboards | |
| Supply | marshalling patchboards or Power Rail | |
| Core cross section | field side: max. 2.5 mm2 control side: max. 2.5 mm2 internal signal wiring: 0.25 mm2 supply: max. 1.5 mm2 |
|
| Material | ||
| Housing | galvanized steel | |
| Surface | galvanized , vibratory finishing | |
| Mass | approx. 4 kg , without modules | |
| Dimensions | 485 mm x 132 mm x 250 mm (W x H x D) | |
| Height | 132 mm | |
| Width | 485 mm | |
| Depth | 250 mm | |
| Mounting | slotted hole 8 x 10 mm | |
| Grounding | via front fastening M8 , via lateral fastening on both sides M5 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27219090 |
| ECLASS 12.0 | 27219090 |
| ECLASS 11.0 | 27219290 |
| ECLASS 10.0.1 | 27219290 |
| ECLASS 9.0 | 27219290 |
| ECLASS 8.0 | 27219290 |
| ECLASS 5.1 | 27279201 |
| ETIM 9.0 | EC003015 |
| ETIM 8.0 | EC003015 |
| ETIM 7.0 | EC003015 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 32101514 |
Details: K-RACK.2.**.*.*.WW.01-Y*******
Function
The device is a subrack for K-System isolators, which replaces the E-card subrack.
A maximum of 33 isolators can be mounted on the device. The isolator modules are mounted on the DIN mounting rail.
The isolators can be supplied via marshalling patchboards or via the power rail.
Faults can be forwarded to the control via the power rail for evaluation.
The signals are transmitted to the field and control side via marshalling patches.
Product Documentation: K-RACK.2.**.*.*.WW.01-Y*******
| Safety and Security Documentation | Language | File Type | File Size |
|---|---|---|---|
| Instruction manual | ENG | 139 KB |
Approvals: K-RACK.2.**.*.*.WW.01-Y*******
| Declaration of Conformity | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4835 | ALL | 264 KB |
Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.