Serviceline Industrial Sensors
Serviceline Explosion Protection
RTD Converter KFD0-TR-Ex1
- 1-channel isolated barrier
- 24 V DC supply (loop powered)
- 2- or 3-wire Pt100 RTD input
- Output 4 mA ... 20 mA, temperature linearization selectable
- DIP switch selectable ranges
- Sensor breakage detection
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of KFD0-TR-Ex1
| General specifications | ||
|---|---|---|
| Signal type | Analog input | |
| Supply | ||
| Rated voltage | 12 ... 35 V DC loop powered | |
| Power dissipation | 0.4 W | |
| Input | ||
| Connection side | field side | |
| Connection | terminals 1, 2-, 3+ suitable for Pt100, 2- and 3-wire connection | |
| Lead resistance | max. 100 Ω per line | |
| Measuring current | approx. 1 mA | |
| Output | ||
| Connection side | control side | |
| Connection | terminals 9+, 8- | |
| Load | (U -12 V) / 0.02 A | |
| Current output | 4 ... 20 mA , limited to ≤ 35 mA | |
| Fault signal | upscaling ≥ 22 mA (limited to 35 mA) | |
| Transfer characteristics | ||
| Measurement range | span without linearization 25 ... 800 °C (77 ... 1472 °F)/with linearization 25 ... 375 °C (77 ... 707 °F), both adjustable zero point without linearization -200 ... 400 °C (-328 ... 752 °F)/with linearization -30 ... 375 °C (-22 ... 707 °F), both adjustable |
|
| Deviation | ||
| After calibration | 0.1 % of full-scale value incl. linearity and hysteresis | |
| Influence of ambient temperature | span and zero point 0.015 % / K or ± 10 mΩ / K | |
| Influence of supply voltage | 6.5 ppm/V | |
| Rise time | 250 ms | |
| Galvanic isolation | ||
| Input/Output | available | |
| Indicators/settings | ||
| Control elements | DIP-switch rotary switch |
|
| Configuration | via DIP switches via rotary switch |
|
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Insulation coordination | EN 50178 | |
| Galvanic isolation | EN 50178 | |
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | screw terminals | |
| Mass | approx. 150 g | |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | ZELM 00 ATEX 0036 | |
| Marking |  II (1)GD [EEx ia] IIC |
|
| Voltage | 16.1 V | |
| Current | 33 mA | |
| Power | 131 mW | |
| Certificate | TÜV 01 ATEX 1777 X | |
| Marking | II 3G Ex nA II T4 |
|
| Galvanic isolation | ||
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | |
| International approvals | ||
| CSA approval | ||
| Control drawing | 116-0132 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Documents: KFD0-TR-Ex1
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| Manual Isolated Barriers K-system | ENG | 760 KB | |
| Manuel pour Barrières Isolées de Système K | FRA | 759 KB | |
| Handbuch Trennbarrieren K-System | GER | 745 KB | |
| Manual Isolated Barriers K-system | RUS | 4107 KB | |
| Instruction manuals | |||
| Инструкции | BUL | 69 KB | |
| Návod k poużití | CZE | 61 KB | |
| Instruktions manual | DAN | 58 KB | |
| Instruction manual | ENG | 50 KB | |
| Kasutusjuhend | EST | 56 KB | |
| Käyttöohje | FIN | 56 KB | |
| Manuel d'instructions | FRA | 97 KB | |
| Betriebsanleitung | GER | 62 KB | |
| Οδηγίες χρήσης | GRE | 73 KB | |
| Handleiding | HOL | 72 KB | |
| Instruction manual / Betriebsanleitung | HRV | 70 KB | |
| Használati útmutató | HUN | 71 KB | |
| Manuale di istruzioni | ITA | 93 KB | |
| Lietošanas pamācība | LAV | 68 KB | |
| Instrukciju vadovas | LIT | 68 KB | |
| Instrukcja obsługi | POL | 72 KB | |
| Manual de instruções | POR | 72 KB | |
| Manual de utilizare | RON | 71 KB | |
| Návod na poużitie | SLK | 130 KB | |
| Manual de instrucciones | SPA | 95 KB | |
| Manual | SWE | 66 KB | |
CAD+CAE: KFD0-TR-Ex1
| EPLAN | File Type | File Size | |
|---|---|---|---|
| EPLAN macro EDZ / EPLAN Makro EDZ | EDZ | 48 KB | |
| Prolist | |||
| Prolist device specification / Prolist Gerätespezifikation | XML | 28 KB | |
Approvals+Certificates: KFD0-TR-Ex1
| Statements of compliance | Certificate No. | File Type | File Size |
|---|---|---|---|
| EU-Declaration of conformity / EU-Konformitätserklärung | DOC-0769B | 122 KB | |
| Certificates | |||
| Belarus Pattern Approval | Nr. 11709 | 15640 KB | |
| Canada CSA | CoC 1029981 C | 201 KB | |
| China NEPSI | GYJ 15.1117 | 3319 KB | |
| EAC EAC TP TC 020/2011 | TC RU C-DE.MH04.B.00397 | 680 KB | |
| Europe TUV Nord ATEX Category 3 | TÜV 01 ATEX 1777X | 767 KB | |
| Europe ZELM ATEX Category (1) GD | ZELM 00 ATEX 0036 | 442 KB | |
| Russia Belarus EAC Kazakhstan NANIO "CCVE" EAC TP TC 012/2011 | TC RU C-IT.GB05.B.00718 | 2731 KB | |
| Russia VNIIMS Pattern Approval | DE.C.32.004.A No.53706 | 4041 KB | |
| South Africa MASC Zone 2 | MASC S/17-0871 | 242 KB | |
| TUV Nord IECEx Certificate of Conformity | IECEx TUN 06.0004 | LINK | --- |
| Control drawings | |||
| Control Drawing CSA / Control Drawing CSA | 54 KB | ||
Function: KFD0-TR-Ex1
This isolated barrier is used for intrinsic safety applications. It is a loop-powered isolator that converts the resistance from a 3-wire RTD in the hazardous area to a 4 mA ... 20mA signal in the safe area.
A selectable analog linearization ensures a temperature linear 4 mA ... 20mA output between 25 °C ... 375 °C.
It also features conveniently located DIP switches, rotary switches and potentiometers to make field calibration easy.
Pepperl+Fuchs AG
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
© 2019 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,200 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.