Serviceline Industrial Sensors
Serviceline Explosion Protection

Control interface unit IC-KP2-2HB17-2V1D

IC-KP2-2HB17-2V1D
  • LED status indicator of bus communication and read/write heads
  • Network loop through by means of integrated 2 port switch
  • Max. 2 read/write heads can be connected
  • Alternatively 1 read/write head and 1 trigger sensor can be connected

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  IC-KP2-2HB17-2V1D

Product Description
IDENTControl Compact control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocols
General specifications
Number of read/write headsmax. 2
alternatively 1 read/write head and 1 trigger sensor
UL File NumberE87056
Functional safety related parameters
MTTFd140 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
LED Link/Trafficgreen: network connection
yellow: flashes in rhythm with the transmitted data
LEDs 1, 2Status indicator for read/write heads
green: command at read/write head active
yellow: approx. 1 second long, if command was successfully executed
LEDs CH1, CH2green: read head detected
red: Configuration error
LED PWR/ERRgreen: power on
yellow: system is starting
red: PROFINET bus failure
Rotary switchAddress setting
Electrical specifications
Rated operating voltage20 ... 30 V DC , PELV
Ripple≤ 10 % at 30 V DC
Current consumption≤ 4 A incl. read/write heads
Power consumption3.5 W Without read/write heads
Galvanic isolationbasic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff
Interface 1
Physical Ethernet
ProtocolSMTP
HTTP
TCP/IP (Port 10000)
MODBUS/TCP
EtherNet/IP
PROFINET IO
Transfer rate10 MBit/s or 100 MBit/s
Interface 2
Physical Ethernet
ProtocolSMTP
HTTP
TCP/IP (Port 10000)
MODBUS/TCP
EtherNet/IP
PROFINET IO
Transfer rate10 MBit/s or 100 MBit/s
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61000-6-2
EN 61000-6-4
RoHS
Directive 2011/65/EU (RoHS)EN 50581
Standard conformity
Degree of protectionIEC 60529
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Climatic conditionsair humidity max. 96 %
Salt spray resistant to EN 60068-2-52
Shock and impact resistanceOscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6
Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27
Mechanical specifications
Degree of protectionIP67
ConnectionRead/write heads: shielded, 4-pin, M12 connector
Power supply: M12 connector
Protective earth: M4 earthing screw
Ethernet: M12 plug connection
Material
Housingpowder coated aluminum
Installationscrew fixing
Massapprox. 300 g

Documents: IC-KP2-2HB17-2V1D

ManualsLanguageFile TypeFile Size
Manual IC-KP2-2HB17-2V1DENGPDF3711 KB
Manual Read / Write Ranges and Passing Speeds RFIDENGPDF3640 KB
Handbuch IC-KP2-2HB17-2V1DGERPDF3721 KB
Handbuch Schreib- und Leseabstände und Vorbeifahrgeschwindigkeiten RFIDGERPDF3642 KB
Short instructions, safety information
Quick Start Guide IC-KP2-*ENGPDF2285 KB
Kurzanleitung IC-KP2-*GERPDF2341 KB

Approvals+Certificates: IC-KP2-2HB17-2V1D

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0687CPDF163 KB
Certificates
KoreaKCC-REI-PF1-ICKP22HB172V1DPDF398 KB
Russia TUV GOST-R101-KC/542PDF90 KB
US CA ULE87056LINK---

Commissioning: IC-KP2-2HB17-2V1D

Commissioning examplesLanguageFile TypeFile Size
Commissioning IC-KP2-2HB17 Profinet S7 Multiframe ParameterENGPDF2624 KB
Commissioning IC-KP2-2HB17 Profinet S7 Singleframe ParameterENGPDF2660 KB
Commissioning IC-KP2-2HB17 with Profinet at S7 PLCENGPDF289 KB
Inbetriebnahme IC-KP2-2HB17 Profinet S7 Multiframe ParameterGERPDF1804 KB
Inbetriebnahme IC-KP2-2HB17 Profinet S7 Singleframe ParameterGERPDF2674 KB
Inbetriebnahme IC-KP2-2HB17 mit Profinet an S7-SteuerungGERPDF289 KB
Commissioning files
Function block Step 7 Classic for the evaluation unit IC-KP2-2HBx with the RFID heads IQH1-...-V1 for complete reading and writing of the IQC21 data carrier / Funktionsbaustein Step 7 Classic für die Auswerteeinheit IC-KP2-2HBx mit den RFID-Köpfen IQH1-...-V1 zum vollständigen Lesen und Schreiben des IQC21 DatenträgersALLZIP2215 KB
Function block Step 7 Classic for the evaluation unit IC-KP2-2HBx with the RFID heads IQH1-...-V1 for complete reading and writing of the IQC22 data carrier / Funktionsbaustein Step 7 Classic für die Auswerteeinheit IC-KP2-2HBx mit den RFID-Köpfen IQH1-...-V1 zum vollständigen Lesen und Schreiben des IQC22 DatenträgersALLZIP2216 KB
Function block Step 7 Classic for the evaluation unit IC-KP2-2HBx with the RFID heads IQH1-...-V1 for complete reading and writing of the IQC24 data carrier / Funktionsbaustein Step 7 Classic für die Auswerteeinheit IC-KP2-2HBx mit den RFID-Köpfen IQH1-...-V1 zum vollständigen Lesen und Schreiben des IQC24 DatenträgersALLZIP2220 KB
Function block Step 7 Classic for the evaluation unit IC-KP2-2HBx with the RFID heads IQH1-...-V1 for complete reading and writing of the IQC33 data carrier / Funktionsbaustein Step 7 Classic für die Auswerteeinheit IC-KP2-2HBx mit den RFID-Köpfen IQH1-...-V1 zum vollständigen Lesen und Schreiben des IQC33 DatenträgersALLZIP2209 KB
Function block Step 7 Classic for the evaluation unit IC-KP2-2HBx with the RFID heads IQH1-...-V1 for complete reading and writing of the IQC35 data carrier / Funktionsbaustein Step 7 Classic für die Auswerteeinheit IC-KP2-2HBx mit den RFID-Köpfen IQH1-...-V1 zum vollständigen Lesen und Schreiben des IQC35 DatenträgersALLZIP2214 KB
Function block Step 7 Classic for the evaluation unit IC-KP2-2HBx with the RFID heads IQH1-...-V1 for reading and writing of the IQC37 data carrier / Funktionsbaustein Step 7 Classic für die Auswerteeinheit IC-KP2-2HBx mit den RFID-Köpfen IQH1-...-V1 zum Lesen und Schreiben des IQC37 DatenträgersALLZIP2219 KB
Simatic S7 function block V3.0 Profinet connection IC-KP2-2HB17-2V1D / Simatic S7 Funktionsbaustein V3.0 Profinet Anbindung IC-KP2-2HB17-2V1DALLZIP1231 KB
Step 7 function block S7-300/400 for IC-KP2-2HB17 (Profinet) and IC-KP2-2HB6 (Profibus) MultiFrame protocol UHF-System / Step 7 Funktionsbaustein S7-300/400 für IC-KP2-2HB17 (Profinet) und IC-KP2-2HB6 (Profibus) MultiFrame Protokoll UHF-SystemALLZIP8387 KB
Step 7 function block S7-400 with CP for TCP/IP communication IC-KP2-2HB17-2V1D MultiFrame protocol UHF-System / Step 7 Funktionsbaustein S7-400 mit CP für TCP/IP Kommunikation IC-KP2-2HB17-2V1D MultiFrame Protokoll UHF-SystemALLZIP1295 KB
Step 7 function block S7-400 with CP for TCP/IP communication IC-KP2-2HB17-2V1D SingleFrame protocol UHF-System / Step 7 Funktionsbaustein S7-400 mit CP für TCP/IP Kommunikation IC-KP2-2HB17-2V1D SingleFrame Protokoll UHF-SystemALLZIP1274 KB

Associated Products: IC-KP2-2HB17-2V1D

Accessory of

HF read/write head, ISO 15693, for IDENTControlfa

HF read/write head, ISO 15693, for IDENTControlfa

HF read/write head, ISO 15693, for IDENTControlfa

Read/Write head for IDENTControl, 125 kHz, thread M30 x 1.5fa

Read/Write head for IDENTControl, 125 kHz, VariKont housingfa

Read/Write head for IDENTControl, 125 kHz, thread M18 x 1fa

Read/Write head for IDENTControl, 125 kHz, flat housingfa

Read/Write head for IDENTControl, 125 kHz, square housingfa
UHF read/write head for hazardous areas, for IDENTControl, Canada, USA, and Mexicofa
UHF read/write head for IDENTControl, Europefa
UHF read/write head for IDENTControl, Indiafa
UHF read/write head for IDENTControl, Singapore and Vietnamfa
UHF read/write head for IDENTControl, Russiafa
UHF read/write head for IDENTControl, Moroccofa
Read/write head for IDENTControl, USA, Canada, Mexico, and Argentinafa
UHF read/write head for IDENTControl, Chinafa
UHF read/write head for IDENTControl, Brazilfa
UHF read/write head for IDENTControl, Japanfa
UHF read/write head for IDENTControl, Australiafa
UHF read/write head for IDENTControl, Thailand and Hong Kongfa
UHF read/write head for IDENTControl, Malaysiafa
UHF read/write head for IDENTControl, Singapore and Vietnamfa
HF read/write head, ISO 15693, for IDENTControlfa
HF read/write head, ISO 15693, for IDENTControlfa
HF read/write head, ISO 15693, for IDENTControlfa
Read/Write head for IDENTControl, 125 kHz, square housingfa
LF read/write head for IDENTControlfa
LF read/write head for IDENTControlfa
Read/Write head for IDENTControl, 125 kHzfa
Read/Write head for IDENTControl, Europe, Middle East and Africafa
Read/Write head for IDENTControl, Asia and the Americas except Canada, United States and Mexicofa
Read/write head for IDENTControl, USA and Argentinafa
LF read/write head for IDENTControlfa
Accessories

Connecting cable, M12 to M12, PUR cable 4-pin, shieldedfa

Connecting cable, M12 to M12, PUR cable 4-pin, shieldedfa

Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa

Connecting cable, M12 to M12, PUR cable 4-pin, shieldedfa

Female cordset, M12, 4-pin, shielded, PUR cablefa
Mounting aid for DIN railfa

Function: IC-KP2-2HB17-2V1D

The RFID identification system IDENTControl Compact from Pepperl+Fuchs offers a vast number of benefits compared to other systems, thanks to its innovative design. The control interfaces IDENTControl and IDENTControl Compact make up the core of the system.

With its integrated interfaces to all commercially available fieldbus systems such as PROFIBUS, PROFINET, Ethernet, EtherCAT, CC-Link, serial connections (RS 232 or RS 485) and numerous connection options for read/write heads available for frequency ranges LF, HF and UHF, the IDENTControl Compact control interface can be easily and flexibly adapted to your requirements.

LEDs on the front of the housing indicate bus communication, connected read/write heads and active read/write commands. Reliability of the application is further increased by using trigger sensors.

The system is equally suited for use in control cabinets and field use in IP67. The interface to the higher-level fieldbus is integrated in the housing, and all connections are designed such that they are pluggable. This enables simple installation and quick, problem-free replacement in case of device failure. The consistent EMC design, with metal housing, grounding and shielded wires, offers a high degree of reliability.

Visit the RFID Hub

Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …