Serviceline Industrial Sensors
Serviceline Explosion Protection

Diffuse mode sensor RL39-8-2000/32/40a/82a/116

RL39-8-2000/32/40a/82a/116
  • Infrared light
  • Light/dark ON, switchable
  • Degree of protection IP67

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  RL39-8-2000/32/40a/82a/116

Product Description
Diffuse mode sensor
General specifications
Detection range0 ... 2000 mm
Adjustment range200 ... 2000 mm
Reference targetstandard white 200 mm x 200 mm
Light sourceIRED
Light typemodulated infrared light
Ambient light limitIEC / EN 60947-5-2 , 10000 Lux
Functional safety related parameters
MTTFd800 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLED yellow: switching state
LED red: pre-fault indication
Control elementsSensing range adjuster, light-on/dark-on changeover switch
Electrical specifications
Operating voltage10 ... 30 V DC
Ripple10 %
No-load supply current≤ 20 mA
Time delay before availability≤ 300 ms
Output
Pre-fault indication output1 PNP, active when falling short of the stability control
Switching typelight/dark on
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltagemax. 30 V DC
Switching currentmax. 200 mA , resistive load
Voltage drop≤ 3 V
Switching frequency≤ 300 Hz
Response time≤ 1.5 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
ApprovalsCE
Ambient conditions
Ambient temperature-25 ... 55 °C (-13 ... 131 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width25 mm
Housing height64 mm
Housing depth75 mm
Degree of protectionIP67
Connectionterminal compartment PG9, ≤ 2.5 mm2
Material
HousingPBT
Optical facePMMA
Massapprox. 100 g
General information
Scope of deliveryMounting aid

Documents: RL39-8-2000/32/40a/82a/116

Instruction leafletsLanguageFile TypeFile Size
Instruction leaflet / Beipackzettel ALLPDF412 KB

CAD+CAE: RL39-8-2000/32/40a/82a/116

CADFile TypeFile Size
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS260 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP182 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: RL39-8-2000/32/40a/82a/116

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-2134APDF185 KB