Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
MLV41-8-H-500-RT-IO/65b/92/136
| Product Description |
| Diffuse sensor with measurement core technology, compact housing design, background suppression and 3 further adjustable operating modes, IO-Link interface, 500 mm adjustable detection range, red light, 2 push-pull outputs, M12 plug |
| General specifications |
| Detection range | 20 ... 500 mm
Black-white difference < 5% |
| Adjustment range | 40 ... 500 mm |
| Diagnosis range | 20 ... 500 mm |
| Reference target | standard white, 100 mm x 100 mm |
| Light source | LED |
| Light type | modulated visible red light |
| Diameter of the light spot | approx. 25 mm at sensor range 500 mm |
| Angle of divergence | approx. 3 ° |
| Ambient light limit | 25000 Lux |
| Functional safety related parameters |
| MTTFd | 500 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| Function indicator | 2 LEDs yellow
ON: object inside the scanning range
OFF: object outside the scanning range |
| Control elements | Sensing range adjuster |
| Parameterization indicator | IO link communication: green LED goes out briefly (1 Hz) |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC , class 2 |
| Ripple | max. 10 % |
| No-load supply current | max. 25 mA at 24 V supply voltage |
| Interface |
| Interface type | IO-Link |
| Protocol | IO-Link V1.0 |
| Mode | COM 2 (38.4 kBaud) |
| Output |
| Switching type | dark on |
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA |
| Voltage drop | ≤ 2 V DC |
| Switching frequency | 200 Hz |
| Response time | 2.5 ms |
| Conformity |
| Product standard | EN 60947-5-2 |
| Approvals and certificates |
| UL approval | cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure) |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F)
|
| Storage temperature | -40 ... 75 °C (-40 ... 167 °F) |
| Mechanical specifications |
| Housing width | 31 mm |
| Housing height | 56.5 mm |
| Housing depth | 13.6 mm |
| Degree of protection | IP67 |
| Connection | 4-pin, M12 x 1 connector |
| Material | |
| Housing | Aluminum , Delta-Seal coated |
| Optical face | glass pane |
| Connector | metal |
| Mass | approx. 40 g |
Classifications
| System | Classcode |
| ECLASS 11.0 | 27270904 |
| ECLASS 10.0.1 | 27270904 |
| ECLASS 9.0 | 27270904 |
| ECLASS 8.0 | 27270904 |
| ECLASS 5.1 | 27270904 |
| ETIM 8.0 | EC002719 |
| ETIM 7.0 | EC002719 |
| ETIM 6.0 | EC002719 |
| ETIM 5.0 | EC002719 |
| UNSPSC 12.1 | 39121528 |
Documents:
MLV41-8-H-500-RT-IO/65b/92/136
CAD+CAE:
MLV41-8-H-500-RT-IO/65b/92/136
Approvals+Certificates:
MLV41-8-H-500-RT-IO/65b/92/136
Software:
MLV41-8-H-500-RT-IO/65b/92/136
Associated Products:
MLV41-8-H-500-RT-IO/65b/92/136
| Accessories |
|
|
|
| Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Mounting bracket for Sensors series MLV41 for M12 rod mountingfa |
|
|
|
|
| Mounting bracket fa |
|
|
|
|
| IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa |
|
Function:
MLV41-8-H-500-RT-IO/65b/92/136
The diffuse mode sensor with MPT technology combines the benefits of the triangulation principle with the measuring functionality of a distance sensor. The integrated measuring principle provides an extremely wide range of switching element functions in one device, along with a large detection range and a small black/white difference up to the final detection range. The sensor is equipped with an IO-Link interface, through which the measuring principle is optimized to the requirements of the relevant application.
+49 621 776-0