Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Triangulation sensor (BGE) OBT300-R100-IO-1T-L-Y0093

OBT300-R100-IO-1T-L-Y0093
  • Miniature design with versatile mounting options
  • Secure and gapless detection, even near the surface through background evaluation
  • DuraBeam Laser Sensors - durable and employable like an LED
  • Extended temperature range
    -40°C ... 60°C
  • High degree of protection IP69K
  • IO-link interface for service and process data

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  OBT300-R100-IO-1T-L-Y0093

Product Description
Laser diffuse mode sensor with background evaluation
General specifications
Detection range7 ... 300 mm
Light sourcelaser diode
Light typemodulated visible red light
Laser nominal ratings
Laser class1
Wave length680 nm
Black/White difference (6 %/90 %)< 5 % at 150 mm
Diameter of the light spotapprox. 1 mm at a distance of 200 mm
Angle of divergenceapprox. 0.3 °
Functional safety related parameters
MTTFd560 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLED yellow:
constantly on - background detected (object not detected)
constantly off - object detected
Control elementsLight-on/dark-on changeover switch
Electrical specifications
Operating voltage10 ... 30 V DC
Interface
Interface typeIO-Link ( via C/Q = pin 4 )
IO-Link Revision1.1
Min. cycle time2.3 ms
Process data witdhProcess data input 1 Bit
Process data output 2 Bit
Compatible master port typeA
Output
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
/Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Usage categoryDC-12 and DC-13
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/ECEN 60947-5-2:2007+A1:2012
Standard conformity
Product standardEN 60947-5-2:2007+A1:2012
IEC 60947-5-2:2007 + A1:2012
Approvals and certificates
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Mechanical specifications
Degree of protectionIP67 / IP69 / IP69K
Connection300 mm fixed cable with M12 x 1, 4-pin connector
Material
HousingPC (Polycarbonate)
Optical facePMMA

Documents: OBT300-R100-IO-1T-L-Y0093

Product informationLanguageFile TypeFile Size
Product information - R100 Series - Small Photoelectric Sensors / Produktinformation - R100 Serie - Kleine optoelektronische SensorenUSAPDF1611 KB

Approvals+Certificates: OBT300-R100-IO-1T-L-Y0093

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-1000DPDF162 KB
Certificates
/cert/cert4435a.pdfCERT-4435PDF230 KB
Canada USA UL Ordinary Location20170306-E87056PDF407 KB

Software: OBT300-R100-IO-1T-L-Y0093

Device type managersRelease InfoFile TypeFile Size
IODD for OBT-1T R100/R101 series / IODD für OBT-1T R100/R101 Serie1.00.002 / 2018-08-15ZIP607 KB

Associated Products: OBT300-R100-IO-1T-L-Y0093

Accessories
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
Mounting bracketfa
Mounting bracketfa
Mounting bracketfa
Mounting bracketfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting aid for round steel ø 10 ... 14 mm or sheet 1 mm  ... 5 mmfa