Serviceline Industrial Sensors
Serviceline Explosion Protection

Convergent mode sensor ML100-8-HGU-100-IR/102/115/162

ML100-8-HGU-100-IR/102/115/162
  • Miniature design
  • Diffuse mode sensor with long, narrow light spot
  • Easy to use
  • Full metal thread mounting

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  ML100-8-HGU-100-IR/102/115/162

Product Description
Convergent mode sensor, 100 mm adjustable detection range, red light, light/dark on, NPN output, fixed cable
General specifications
Detection range7 ... 100 mm
Adjustment range30 ... 100 mm
Reference targetstandard white, 100 mm x 100 mm
Light sourceLED
Light typemodulated infrared light
Polarization filterno
Diameter of the light spotapprox. 7 mm x 50 mm at 100 mm
Angle of divergenceEmitter: 4 ° vertical ; 25 ° horizontal
Optical facefrontal
Ambient light limitEN 60947-5-2:2007+A1:2012
Functional safety related parameters
MTTFd860 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green: power on
Function indicatorLED yellow: lights when object is detected
Control elementsSensing range adjuster
Control elementsLight-on/dark-on changeover switch
Electrical specifications
Operating voltage10 ... 30 V DC
Ripplemax. 10 %
No-load supply current< 20 mA
Output
Switching typeThe switching type of the sensor is adjustable. The default setting is: light on
Signal output1 NPN output, short-circuit protected, reverse polarity protected, open collector
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA , resistive load
Voltage drop≤ 1.5 V DC
Switching frequency500 Hz
Response time1 ms
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/ECEN 60947-5-2:2007+A1:2012
Standard conformity
StandardsUL 60947-5-2
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-30 ... 60 °C (-22 ... 140 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width11 mm
Housing height31 mm
Housing depth20 mm
Degree of protectionIP67
Connection2 m fixed cable
Material
HousingPC (Polycarbonate)
Optical facePMMA
Massapprox. 50 g
Tightening torque, fastening screws0.6 Nm
Cable length2 m

Documents: ML100-8-HGU-100-IR/102/115/162

Instruction leafletsLanguageFile TypeFile Size
Instruction leaflet / Beipackzettel ALLPDF453 KB

Associated Products: ML100-8-HGU-100-IR/102/115/162

Accessories
Mounting aid for ML100 series, Mounting bracketfa
Mounting aid for ML100 series, Mounting bracketfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting aid for ML100 series, Mounting bracketfa
Mounting aid for ML100 series, Mounting bracketfa
Mounting aid for ML100 seriesfa
Mounting aidfa
Mounting bracket fa