Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
General specifications | ||
---|---|---|
Signal type | Digital Input | |
Functional safety related parameters | ||
Safety Integrity Level (SIL) | SIL 2 | |
Supply | ||
Connection | Power Rail or terminals 14+, 15- | |
Rated voltage | 19 ... 30 V DC | |
Ripple | ≤ 10 % | |
Rated current | 20 ... 15 mA | |
Power dissipation | ≤ 1 W including maximum power dissipation in the output | |
Input | ||
Connection side | field side | |
Connection | terminals 1+, 2+, 3- | |
Rated values | acc. to EN 60947-5-6 (NAMUR), see system description for electrical data | |
Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA | |
Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA | |
Line fault detection | breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA | |
Pulse/Pause ratio | min. 100 µs / min. 100 µs | |
Output | ||
Connection side | control side | |
Connection | output I: terminals 7, 8 ; output II: terminals 8, 9 | |
Rated voltage | 30 V DC | |
Rated current | 100 mA , short-circuit protected | |
Response time | ≤ 200 µs | |
Signal level | 1-signal: (external voltage) - 3 V max. for 100 mA 0-signal: blocked output (off-state current ≤ 10 µA) |
|
Output I | signal ; Transistor | |
Output II | signal or error message ; Transistor | |
Collective error message | Power Rail | |
Transfer characteristics | ||
Switching frequency | ≤ 5 kHz | |
Galvanic isolation | ||
Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
Output/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
Indicators/settings | ||
Display elements | LEDs | |
Control elements | DIP-switch | |
Configuration | via DIP switches | |
Labeling | space for labeling at the front | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Conformity | ||
Electromagnetic compatibility | NE 21:2012 , EN 61326-3-2:2008 | |
Degree of protection | IEC 60529:2001 | |
Input | EN 60947-5-6:2000 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Connection | screw terminals | |
Mass | approx. 150 g | |
Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
Data for application in connection with hazardous areas | ||
EU-type examination certificate | EXA 16 ATEX 0016 X | |
Marking | ![]() ![]() ![]() |
|
Input | Ex ia | |
Voltage | 10.5 V | |
Current | 17.1 mA | |
Power | 45 mW (linear characteristic) | |
Supply | ||
Maximum safe voltage | 253 V AC (Attention! Um is no rated voltage.) | |
Output | ||
Maximum safe voltage | 253 V AC (Attention! The rated voltage can be lower.) | |
Galvanic isolation | ||
Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
Directive conformity | ||
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | |
International approvals | ||
UL approval | E106378 | |
Control drawing | 116-0424 (cULus) | |
IECEx approval | ||
IECEx certificate | IECEx EXA 16.0009X | |
IECEx marking | Ex nA [ia Ga] IIC T4 Gc , [Ex ia Da] IIIC , [Ex ia Ma] I | |
General information | ||
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Accessories | ||
Optional accessories | power feed module KFD2-EB2 Universal Power Rail UPR-03 Universal Power Rail UPR-03-S profile rail K-DUCT-BU profile rail K-DUCT-UPR-03 |
Manuals | Language | File Type | File Size |
---|---|---|---|
Functional Safety Manual | ENG | 621 KB | |
Manual | ENG | 3430 KB | |
Handbuch | GER | 3544 KB | |
Handbuch Funktionale Sicherheit | GER | 629 KB | |
Instruction manuals | |||
Инструкции | BUL | 152 KB | |
Návod k poużití | CZE | 146 KB | |
Instruktions manual | DAN | 144 KB | |
Instruction manual | ENG | 150 KB | |
Kasutusjuhend | EST | 141 KB | |
Käyttöohje | FIN | 140 KB | |
Manuel d'instructions | FRA | 147 KB | |
Betriebsanleitung | GER | 152 KB | |
Οδηγίες χρήσης | GRE | 155 KB | |
Handleiding | HOL | 146 KB | |
Instruction manual / Betriebsanleitung | HRV | 144 KB | |
Használati útmutató | HUN | 147 KB | |
Manuale di istruzioni | ITA | 146 KB | |
Lietošanas pamācība | LAV | 144 KB | |
Instrukciju vadovas | LIT | 146 KB | |
Instrukcja obsługi | POL | 148 KB | |
Manual de instruções | POR | 147 KB | |
Manual de utilizare | RON | 145 KB | |
Návod na poużitie | SLK | 146 KB | |
Navodila za uporabo | SLV | 143 KB | |
Manual de instrucciones | SPA | 146 KB | |
Manual | SWE | 142 KB |
CAD | File Type | File Size | |
---|---|---|---|
CAD Portal / CAD Portal | LINK | --- | |
Dimension drawing 2-D (DXF) / Abmessungszeichnung 2-D (DXF) | ZIP | 507 KB | |
Dimension drawing 3-D in IGS format / Abmessungszeichnung 3-D im IGS-Format | IGS | 209 KB | |
Dimension drawing 3-D in STP format / Abmessungszeichnung 3-D im STP-Format | STP | 179 KB |
Statements of compliance | Certificate No. | File Type | File Size |
---|---|---|---|
EU-Declaration of conformity / EU-Konformitätserklärung | DOC-2637 | 91 KB | |
Certificates | |||
Canada UL cUL | E106378 cUL (QUZW7) | LINK | --- |
Canada UL cUL | E106378 cUL (QVAJ7) | LINK | --- |
China SITIIAS CCC Ex Certificate | 2020322316002751 (Singapore) | 1251 KB | |
EAC EAC TP TC 012/2011 | TC RU C-DE.AA71.B.00291 | 2516 KB | |
EAC EAC TP TC 020/2011 | TC RU C-DE.MH04.B.00397 | 680 KB | |
Europe EXA ATEX | EXA 16 ATEX 0016 X | 2049 KB | |
Japan TIIS | TC 22262X | 212 KB | |
Korea KOSHA | 20-AV4BO-0491 | 167 KB | |
Korea KOSHA | 20-AV4BO-0490 | 167 KB | |
USA Canada cULus Certificate of Compliance UL | CoC 20190517 - E106873 RepRef 20190514 | 253 KB | |
USA UL | E106378 UL (QVAJ) | LINK | --- |
USA UL | E106378 UL (QUZW) | LINK | --- |
Worldwide EXA Certificate of Conformity | IECEx EXA 16.0009X | LINK | --- |
Worldwide exida Functional Safety Assessment | P+F 1408-047-C R039 Assessment Report V1 R1 | 1125 KB | |
Control drawings | |||
Control Drawing UL / Control Drawing UL | 129 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
This isolated barrier is used for intrinsic safety applications.
The device transfers digital signals (NAMUR sensors or dry contacts) from a hazardous area to a safe area.
The input controls two passive transistor outputs.
Via switches the mode of operation can be reversed and the line fault detection can be switched off.
Via switch the function of the second output can be defined as a signal output or a fault indication output.
A fault is signalized by LEDs acc. to NAMUR NE44 and a separate collective error message output.