Serviceline Industrial Sensors
Serviceline Explosion Protection

Place Holder Barrier KFD0-LGH

  • IS K-System place holder module
  • Housing width 20 mm
  • Marshalling for field and control side circuits
  • Configurable via plug-in jumpers

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of  KFD0-LGH

Product Description
Place holder barrier for KF modules, intrinsically safe
Electrical specifications
Rated voltage≤ 50 V
Rated current≤ 2 A
Configurationvia plug-in jumpers
Labelingspace for labeling at the front
Degree of protectionIEC 60529
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protectionIP20
Connectionscrew terminals
Massapprox. 120 g
Dimensions20 x 93 x 115 mm (0.8 x 3.7 x 4.5 inch) , housing type B1
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
CertificatePF 08 CERT 1214 X
MarkingEx-Hexagon II 3G Ex nA IIC T4 Gc
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-15:2010
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see

Documents: KFD0-LGH

Instruction manualsLanguageFile TypeFile Size
Operating instructions Place Holder Barriers K-SystemENGPDF59 KB
Betriebsanleitung Platzhalter Trennbausteine K-SystemGERPDF62 KB

Approvals+Certificates: KFD0-LGH

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0031BPDF119 KB
Europe Pepperl+Fuchs Certificate of Compliance ATEX Category 3PF 08 CERT 1214 XPDF208 KB

Function: KFD0-LGH

The place holder barrier is a module for use in cable distribution. It improves accessibility and compactness within a control cabinet.

Different configurations are possible by using wire jumpers.

Intrinsically safe circuits can be connected to terminals 1, 2 and 3 or 4, 5 and 6. Terminals 1 to 6 are linked.

Safe area circuits can be connected to terminals 7, 8 and 9 or 10, 11 and 12.