Serviceline Industrial Sensors
Serviceline Explosion Protection

Read/write station IPT1-FP

  • With integrated control interface unit
  • Serial interfaces and field-bus interfaces selectable through lower part
  • Read distance of up to 100 mm
  • Write distance of up to 50 mm
  • 3 LEDs for function indication
  • Degree of protection IP67
  • Optimized reading speed for fixed codes
  • Suited for writing of IPC11

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of  IPT1-FP

Product Description
LF R/W system, fully assembled as configuration and test station
General specifications
Operating frequency125 kHz
Transfer rate2 kBit/s
Operating distancemaximum: 100 mm
UL File NumberE87056
Indicators/operating means
LED greenPower on
LED yellowIPC detected
LED redbus fault (when using fieldbus interfaces)
Electrical specifications
Rated operating voltage20 ... 30 V DC , ripple 10 %SS , PELV
Power consumptionmax. 5 W , in connection with the base
Galvanic isolation
Operating voltage/interfacefunctional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff
Mag. Field strength< 27.3 dBµA/m at 10 m
Physical Interface type depends on base used
Approvals and certificates
EAC conformityTR CU 020/2011
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protectionIP67 according to EN 60529, with base

Approvals+Certificates: IPT1-FP

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3522PDF161 KB
Russia TUV GOST-R101-KC/542PDF90 KB

Associated Products: IPT1-FP

Matching system components
Base with serial interfaces RS 232 and RS 485fa
Base with addressable serial Interface RS 485fa
Base with addressable serial Interface RS 485fa
Base for INTERBUSfa
Base for INTERBUS, plug-in connectionfa
Base for PROFIBUS DPfa
Base for PROFIBUS DP, plug-in connectionfa
Base for PROFIBUS DP, stainless steel versionfa
Base with serial interfaces RS 232 and RS 485, stainless steel version V4Afa
Mounting bracketfa

Function: IPT1-FP

The IPT1-FP read/write station is used in combination with a base which contains the interface for connecting to a computer. Through the choice of base, either serial interfaces or field-bus interfaces may be selected.

The analysis system is integrated in the device and simplifies the system construction. Protection class IP67 allows the device to be installed directly in the field.

Visit the RFID Hub

Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …