Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.
Download the complete datasheet as a PDF:
|Read/write head for IDENTControl, USA and Argentina|
|Operating frequency||902 MHz … 928 MHz: USA, Argentina
Transmission licenses for other countries on request
|Emitted power||10 ... 4000 mW EIRP adjustable|
|Operating distance||typ. 4 m|
|Functional safety related parameters|
|LED green||Power on|
|LED yellow||Read/write operation successful|
|LED blue||Transmission mode|
|Power consumption||≤ 10 W|
|Supply||from the IDENTControl|
|Compliance with standards and directives|
|Electromagnetic compatibility||EN 301489-1 V1.9.2:2011
EN 301489-3 V1.4.1:2003
|Safety||IEC 60950-1:2005/A1:2009 (modified)|
|Degree of protection||EN 60529:2000|
|Approvals and certificates|
|UL approval||UL 61010-1 3rd Edition
CSA C22.2 NO. 61010-1-12 3rd Edition
(EN 60950-, EN 60529 and IP67 are not included)
|FCC approval||This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
|IC approval||This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
|Radio approval||USA: FCC IREIUH-F192-V1|
|Ambient temperature||-25 ... 70 °C (-13 ... 158 °F)|
|Storage temperature||-40 ... 85 °C (-40 ... 185 °F)|
|Degree of protection||IP67|
|Connection||connector M12 x 1|
|Mass||approx. 3000 g|
|Manuals||Language||File Type||File Size|
|Manual IUH-F192-V1-*||ENG||3349 KB|
|Handbuch IUH-F192-V1-*||GER||6103 KB|
|Short instructions, safety information|
|Quick Start Guide IUH-F192-V1-*||ENG||1840 KB|
|Kurzanleitung IUH-F192-V1-*||GER||1846 KB|
|CAD||File Type||File Size|
|3-D model in IGS format / 3-D-Modell im IGS-Format||IGS||15571 KB|
|3-D model in STP format / 3-D-Modell im STP-Format||STP||5360 KB|
|CAD Portal / CAD Portal||LINK||---|
|Certificates||Certificate No.||File Type||File Size|
|Argentina Radio Approval||C-21837||93 KB|
|USA FCC Approval||USA IREIUH-F192-V1||64 KB|
The IUH-F192-V1-FR2-02 read/write head operates in the UHF frequency range and is optimized for use in industrial applications involving greater distances. The device reads and writes passive tags according to EPC Generation 2 (ISO/IEC 18000-63). The read/ write head can be operated in the USA, Canada and Mexico. The read/write head complies with the respective radio regulations.
Wide range of options supported for filtering data. The read/write head is connected to the IDENTControl interface using an M12 connector. The user can monitor the status of the read/write head using the integrated LEDs.
The read/write head has a typical detection range of approx. 3 meters; this range is determined by the tag used and can be changed by adjusting the transmission power. Other influencing factors are the application specific setup and surrounding materials, particularly metal. The read and write distances measured under ideal conditions can be found in a separate document. For the actual read and write distances under real conditions, the combination of read/write head and tag must be tested in the intended application.
Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …