Serviceline Industrial Sensors
Serviceline Explosion Protection
Industrial Sensors

Read/write station IQT1-F61-IO-V1

IQT1-F61-IO-V1
  • Operating frequency 13.56 MHz
  • IO-Link interface
  • Conforms to ISO 15693
  • Suitable for FRAM transponder
  • LEDs as function indicators
  • Particularly flat construction
  • Connection cable with V1 plug (M12 x 1)
  • Degree of protection IP67
  • Can be mounted on metal
  • For connection to IO-Link master

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  IQT1-F61-IO-V1

Product Description
HF read/write station with IO-Link in accordance with ISO 15693
General specifications
Operating frequency13.56 MHz
Transfer rate26 kBit/s
Sensing range
Read distance0 ... 55 mm
Write distance0 ... 55 mm
Widthmax. 45 mm
UL File NumberE87056
Functional safety related parameters
MTTFd280 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
LED greenIlluminated: power on
Flashing: IO-Link communication
LED yellowData carrier detected
LED redFlashing: IO-Link communication interrupted
LED blueWrite/read attempt is being performed
Electrical specifications
Rated operating voltage20 ... 30 V DC , ripple 10 %SS
No-load supply current≤ 70 mA (at 24 V DC)
Power consumption≤ 2 W
Interface
Interface typeIO-Link
IO-Link revision1.1
Vendor ID1 (0x0001)
Device ID4194561 (0x400101)
Data transfer rateCOM3 (230.4 kbits/s)
Min. cycle time4 ms
SIO mode supportno
Compatible master port typeClass A
Class B
Directive conformity
Radio equipment
Directive 2014/53/EUEN 301489-1
EN 301489-3
EN 300330
EN 62368-1
EN 50364
RoHS
Directive 2011/65/EU (RoHS)IEC/EN 63000
Standard conformity
Degree of protectionEN 60529
Communication interfaceIEC 61131-9 / IO-Link V1.1.2
RFIDISO/IEC 15693-2
ISO/IEC 15693-3
ISO/IEC 18000-3
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure
FCC approvalThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC approvalThis device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
MIC approvalAC-21097
Radio approvalUSA: FCC IREIQT1F61IO
Canada: IC 7037A-IQT1F61IO
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Housing length80 mm
Housing width28 mm
Housing height12 mm
Degree of protectionIP67
Connectionconnector M12 x 1
Material
HousingPBT
Encapsulation compoundWEVO 403FL/300
Installation
Distance between two heads≥ 150 mm
Massapprox. 60 g
Cable length20 cm

Classifications

SystemClasscode
ECLASS 11.027280401
ECLASS 10.0.127280401
ECLASS 9.027280401
ECLASS 8.027280401
ECLASS 5.127280401
ETIM 8.0EC002998
ETIM 7.0EC002998
ETIM 6.0EC002998
ETIM 5.0EC002998
UNSPSC 12.143211710

CAD+CAE: IQT1-F61-IO-V1

CADFile TypeFile Size
3-D model / 3-D-ModellSTP201 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: IQT1-F61-IO-V1

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3819BPDF110 KB
Certificates
Canada CETECOM ICT Radio Approval7037A-IQT1F61IOPDF1829 KB
IO-Link Manufacturer DeclarationCERT-4469PDF160 KB
Japan Radio ApprovalCERT-6239PDF216 KB
Russia EAC TP TC 020/2011CERT-6075PDF347 KB
US CA ULE87056LINK---
USA CETECOM ICT FCC ApprovalIREIQT1F61IOPDF127 KB

Software: IQT1-F61-IO-V1

IO Device Description (IODD)Release InfoFile TypeFile Size
IODD for IQT1 series / IODD für IQT1-Serie1.01.000 / 2018-02-22ZIP239 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-ParametriertoolV1.00.005 / 2021-07-01ZIP64072 KB

Associated Products: IQT1-F61-IO-V1

Accessory of
100 V AC to 240 V AC wide-range input, Output 24 V DC, 5 A, 120 W, 1-phase, Housing width 32 mm, Efficiency up to 94.3 %, Minimal inrush current surge, DC OK relay contact, Suitable for Zone 2/Div. 2 mounting, Device type: device for DIN rail mounting, Rated voltage: 24 V DC, Current: 6 ... 5.1 A at ambient temperature < 45 °C (113 °F)
5 ... 4.3 A at ambient temperature 60 °C (140 °F)
3.8 ... 3.2 A at ambient temperature 70 °C (158 °F)
linear power derating see technical informationpa
Matching System Components
IIoT Starter Kit with IP20 EtherNet/IP Masterfa
IIoT Starter Kit with IP20 PROFINET Master fa
IIoT Starter Kit with IP67 EtherNet/IP Masterfa
IIoT Starter Kit with IP67 PROFINET Masterfa
Accessories

Data carrierfa

Data carrierfa

Data carrierfa

Data carrierfa

Data carrierfa

Data carrierfa

Data carrierfa

Data carrierfa

Data carrierfa

Data carrierfa

Data carrierfa

Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PVC cable greyfa

Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PVC cable greyfa

EtherNet/IP IO-Link master with 8 inputs/outputsfa

PROFINET IO IO-Link master with 8 inputs/outputsfa
Ethernet IO-Link master with PROFINET S2 redundancyfa
Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PVC cable greyfa
EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa
PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa
PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
Ethernet IO-Link module with 8 inputs/outputsfa
Ethernet IO-Link module with 8 inputs/outputsfa
EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa
General Notes Relating to Pepperl+Fuchs Product Information
RFID Read/Write Head IUT-F190-B40 with Industrial Ethernet Interface and REST API

Get to know the new IUT-F190-B40, which is designed for medium detection ranges, and can be quickly and easily integrated into OT and IT systems …

Visit the RFID Hub

Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …

Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
phone +49 621 776-0

© 2022 All Rights Reserved.

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.