Thru-beam sensor (pair) OBE500-R2F-SE1
- Very flat design for direct mounting without mounting bracket
- Very bright, highly visible light spot
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of OBE500-R2F-SE1
| Product Description |
|---|
| Thru-beam sensor, flat design, space-saving M2 mounting, 500 mm detection range, red light, light on, NPN output, fixed cable |
| System components | ||
|---|---|---|
| Emitter | OBE500-R2F-S | |
| Receiver | OBE500-R2F-E1 | |
| General specifications | ||
| Effective detection range | 0 ... 500 mm |
|
| Threshold detection range | 700 mm |
|
| Light source | LED | |
| Light type | modulated visible red light , 630 nm | |
| LED risk group labelling | exempt group | |
| Angle deviation | approx. 2 ° | |
| Object size | typ. starts from 1.5 mm | |
| Diameter of the light spot | approx. 90 mm at a distance of 500 mm | |
| Opening angle | approx. 5 ° | |
| Optical face | frontal | |
| Ambient light limit | EN 60947-5-2 : 25000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 806 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz) | |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| No-load supply current | < 10 mA | |
| Protection class | III | |
| Input | ||
| Test input | Test of switching function at 0 V | |
| Output | ||
| Switching type | NC contact / light-on | |
| Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 50 mA , resistive load | |
| Voltage drop | ≤ 1.5 V DC | |
| Switching frequency | approx. 1 kHz | |
| Response time | 500 µs | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Approvals and certificates | ||
| UL approval | E87056 , cULus Recognized, Class 2 Power Source | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | 2 m fixed cable | |
| Material | ||
| Housing | PC (Polycarbonate) and Stainless steel | |
| Optical face | PMMA | |
| Cable | PUR | |
| Mass | approx. 20 g per sensor | |
| Tightening torque, fastening screws | 0.25 Nm | |
| Dimensions | ||
| Height | 25.5 mm | |
| Width | 12 mm | |
| Depth | 4.1 mm | |
| Cable length | 2 m | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details: OBE500-R2F-SE1
Datasheet: OBE500-R2F-SE1
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet OBE500-R2F-SE1 | 566 KB | |
| Fiche de données OBE500-R2F-SE1 | 570 KB | |
| Datenblatt OBE500-R2F-SE1 | 570 KB | |
| Hoja de datos OBE500-R2F-SE1 | 570 KB |
Approvals+Certificates: OBE500-R2F-SE1
| Certificates | File Type | File Size |
|---|---|---|
| Canada USA UL Ordinary Location | 550 KB | |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 308 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | 299 KB |
For the first time, a consistent solution range of photoelectric functional principles and innovative technologies is available in identical housings. Users benefit from a uniform operating concept across the entire portfolio. Discover the R100, R101, R103, R200 and R201 series ...
Whether glass, solar wafers or printed circuit boards: The photoelectric sensors of the ML100 series are precisely tailored to meet the requirements of various complex detection tasks. Learn more about the portfolio and find the ideal sensor for your application ...
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.