Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Laser thru-beam sensor OBE20M-R100-SEP-IO-0,3M-V3-L

OBE20M-R100-SEP-IO-0,3M-V3-L
  • Miniature design with versatile mounting options
  • DuraBeam Laser Sensors - durable and employable like an LED
  • IO-link interface for service and process data
  • Various frequencies for avoiding mutual interference (cross-talk immunity)
  • Extended temperature range
    -40°C ... 60°C
  • High degree of protection IP69K

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  OBE20M-R100-SEP-IO-0,3M-V3-L

Product Description
Thru-beam sensor SET
System components
EmitterOBE20M-R100-S-IO-0,3M-V3-L
ReceiverOBE20M-R100-EP-IO-0,3M-V3-L
General specifications
Effective detection range0 ... 20 m
Threshold detection range30 m
Light sourcelaser diode
Light typemodulated visible red light
Laser nominal ratings
NoteLASER LIGHT , DO NOT STARE INTO BEAM
Laser class1
Wave length680 nm
Beam divergence> 5 mrad ; d63 < 2 mm in the range of 250 mm ... 750 mm
Pulse length1.6 µs
Repetition ratemax. 17.6 kHz
max. pulse energy9.6 nJ
Diameter of the light spotapprox. 50 mm at a distance of 20 m
Angle of divergenceapprox. 0.3 °
Ambient light limitEN 60947-5-2 : 30000 Lux
Functional safety related parameters
MTTFd440 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Function indicatorYellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Control elementsReceiver: light/dark switch
Control elementsReceiver: sensitivity adjustment
Parameterization indicatorIO link communication: green LED goes out briefly (1 Hz)
Electrical specifications
Operating voltage10 ... 30 V DC
Ripplemax. 10 %
No-load supply currentEmitter: ≤ 13 mA
Receiver: ≤ 13 mA at 24 V supply voltage
Protection classIII
Interface
Interface typeIO-Link ( via C/Q = pin 4 )
Transfer rateCOM 2 (38.4 kBaud)
IO-Link Revision1.1
Min. cycle time2.3 ms
Process data witdhEmitter:
Process data output: 2 Bit
Receiver:
Process data input: 2 Bit
Process data output: 2 Bit
SIO mode supportyes
Device IDEmitter: 0x110402 (1115138)
Reciever: 0x110302 (1114882)
Compatible master port typeA
Input
Test inputemitter deactivation at +UB
Output
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
Signal output1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA , resistive load
Usage categoryDC-12 and DC-13
Voltage drop≤ 1.5 V DC
Switching frequency1250 Hz
Response time0.4 ms
Conformity
Communication interfaceIEC 61131-9
Product standardEN 60947-5-2
Laser safetyEN 60825-1:2014
Approvals and certificates
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient conditions
Ambient temperature-40 ... 60 °C (-40 ... 140 °F) , fixed cable
-25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width11 mm
Housing height37.1 mm
Housing depth21.5 mm
Degree of protectionIP67 / IP69 / IP69K
Connection300 mm fixed cable with M8 x 1, 3-pin connector
Material
HousingPC (Polycarbonate)
Optical facePMMA
MassEmitter: approx. 10 g receiver: approx. 10 g
Cable length0.3 m

Documents: OBE20M-R100-SEP-IO-0,3M-V3-L

Product informationLanguageFile TypeFile Size
Product information - R100 Series - Small Photoelectric Sensors / Produktinformation - R100 Serie - Kleine optoelektronische SensorenUSAPDF1611 KB

Approvals+Certificates: OBE20M-R100-SEP-IO-0,3M-V3-L

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-1000DPDF162 KB
Certificates
Canada USA UL Ordinary Location20170306-E87056PDF407 KB
Pepperl+Fuchs IO-Link Manufacturer DeclarationCERT-4434PDF228 KB
Pepperl+Fuchs IO-Link Manufacturer DeclarationCERT-4433PDF228 KB

Software: OBE20M-R100-SEP-IO-0,3M-V3-L

Device type managersRelease InfoFile TypeFile Size
IODD for OBE R100/R101 series (emitter) / IODD für OBE R100/R101 Serie (Sender)1.00.004 / 2018-12-15ZIP1043 KB
IODD for OBE R100/R101 series (receiver) / IODD für OBE R100/R101 Serie (Empfänger)1.00.002 / 2018-08-15ZIP575 KB

Associated Products: OBE20M-R100-SEP-IO-0,3M-V3-L

Accessories

Female cordset single-ended, M8, 3-pin, PUR cablefa

Female cordset single-ended, M8, 3-pin, PUR cablefa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
Mounting bracketfa
Mounting bracketfa
Mounting bracketfa
Mounting bracketfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting aid for round steel ø 10 ... 14 mm or sheet 1 mm  ... 5 mmfa