Inductive sensor NCN4-12GM35-N0-Y191065
- 4 mm non-flush
NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of NCN4-12GM35-N0-Y191065
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NAMUR | |
| Rated operating distance | 4 mm | |
| Installation | non-flush | |
| Assured operating distance | 0 ... 3.24 mm | |
| Actual operating distance | 3.6 ... 4.4 mm typ. | |
| Reduction factor rAl | 0.37 | |
| Reduction factor rCu | 0.36 | |
| Reduction factor r304 | 0.74 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | |
| Switching frequency | 0 ... 800 Hz | |
| Hysteresis | 1 ... 10 typ. 5 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | yes | |
| Current consumption | ||
| Measuring plate not detected | min. 3 mA | |
| Measuring plate detected | ≤ 1 mA | |
| Switching state indicator | all direction LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 2520 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
|
| Electromagnetic compatibility | NE 21:2007 | |
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| IECEx approval | ||
| Equipment protection level Ga | IECEx PTB 11.0037X | |
| Equipment protection level Gb | IECEx PTB 11.0037X | |
| Equipment protection level Da | IECEx PTB 11.0037X | |
| Equipment protection level Dc (tc) | IECEx TUR 21.0018X | |
| Equipment protection level Mb | IECEx PTB 11.0037X | |
| ATEX approval | ||
| Equipment protection level Ga | PTB 00 ATEX 2048 X | |
| Equipment protection level Gb | PTB 00 ATEX 2048 X | |
| Equipment protection level Da | PTB 00 ATEX 2048 X | |
| Equipment protection level Dc (tc) | TÜV 20 ATEX 8524 X | |
| UL approval | ||
| Ordinary Location | E87056 | |
| Hazardous Location | E501628 | |
| Control drawing | 116-0452 | |
| CML approval | on request | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) | |
| Storage temperature | -40 ... 100 °C (-40 ... 212 °F) | |
| Mechanical specifications | ||
| Connection type | cable | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Cable | ||
| Cable diameter | 4.6 mm ± 0.2 mm | |
| Bending radius | > 12 x cable diameter | |
| Material | PVC | |
| Core cross section | 2x 0.34 mm2 | |
| Length | 0.145 m | |
| Dimensions | ||
| Length | 35 mm | |
| Diameter | 12 mm | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details: NCN4-12GM35-N0-Y191065
Datasheet: NCN4-12GM35-N0-Y191065
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet NCN4-12GM35-N0-Y191065 | 859 KB | |
| Datasheet NCN4-12GM35-N0-Y191065 | 855 KB | |
| Fiche de données NCN4-12GM35-N0-Y191065 | 856 KB | |
| Datenblatt NCN4-12GM35-N0-Y191065 | 856 KB | |
| Scheda tecnica NCN4-12GM35-N0-Y191065 | 856 KB | |
| Datasheet NCN4-12GM35-N0-Y191065 | 861 KB | |
| Folha de dados NCN4-12GM35-N0-Y191065 | 857 KB | |
| Hoja de datos NCN4-12GM35-N0-Y191065 | 856 KB | |
| Datasheet NCN4-12GM35-N0-Y191065 | 868 KB |
Documents: NCN4-12GM35-N0-Y191065
| Instruction manuals | File Type | File Size |
|---|---|---|
| Инструкции | 199 KB | |
| Návod k poużití | 191 KB | |
| Instruktions manual | 190 KB | |
| Instruction manual | 191 KB | |
| Kasutusjuhend | 184 KB | |
| Käyttöohje | 184 KB | |
| Manuel d'instructions | 195 KB | |
| Betriebsanleitung | 191 KB | |
| Οδηγίες χρήσης | 203 KB | |
| Handleiding | 190 KB | |
| Instruction manual / Betriebsanleitung | 189 KB | |
| Használati útmutató | 194 KB | |
| Manuale di istruzioni | 192 KB | |
| Lietošanas pamācība | 190 KB | |
| Instrukciju vadovas | 192 KB | |
| Instrukcja obsługi | 253 KB | |
| Manual de instruções | 194 KB | |
| Manual de utilizare | 194 KB | |
| Návod na poużitie | 191 KB | |
| Navodila za uporabo | 189 KB | |
| Manual de instrucciones | 194 KB | |
| Manual | 188 KB | |
| Technical information | ||
| Installation conditions | 1054 KB | |
| Einbaubedingungen | 1060 KB |
CAD+CAE: NCN4-12GM35-N0-Y191065
| CAD | File Type | File Size |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 55 KB |
| CAD Portal / CAD Portal | LINK | --- |
| EPLAN | ||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | LINK | --- |
| EPLAN macro EDZ / EPLAN Makro EDZ | EDZ | 64 KB |
Approvals+Certificates: NCN4-12GM35-N0-Y191065
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.
Pepperl+Fuchs GB Ltd.
77 Ripponden Road
Oldham OL1 4EL, Lancs.
United Kingdom
sales@gb.pepperl-fuchs.com
+44 161 6336431
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.