IPH-F90A-V1 RFID read/write device

Key Benefits at a Glance

Connection via V1 (M12 x 1) plug connection
Dual-LED for function display
Degree of protection IP67
For connection to IDENTControl evaluation unit

Product photo: RFID read/write device IPH-F90A-V1

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE

DE
EN

Datasheet Classification Informative Literature Product Documentation Design / Simulation Approvals Related Products

Technical data of IPH-F90A-V1

LF RFID read/write device for IDENTControl

Operating frequency

125 kHz

Transfer rate

2 kBit/s

Sensing range

Read distance		3 ... 90 mm (with transponder IPC03-50P at 25°C)
Write distance		3 ... 80 mm (with transponder IPC03-50P at 25°C)
Width		max. 140 mm

UL File Number

E87056

MTBF

350 a (Operation at +40 °C)

LED green/yellow

green: power on
green flashing: read/write attempt performed
yellow: data carrier detected

Power consumption	P₀	≤ 1.2 W
Supply		from the IDENTControl
Mag. Field strength		< 27.3 dBµA/m at 10 m

Radio equipment

Directive 2014/53/EU

EN 301489-1
EN 301489-3
EN 300330
EN 62368-1
EN 50364

RoHS

Directive 2011/65/EU (RoHS)

IEC/EN 63000

Degree of protection		EN 60529
RFID		ISO/IEC 18000-2

Ambient temperature		-25 ... 55 °C (-13 ... 131 °F)
Storage temperature		-40 ... 55 °C (-40 ... 131 °F)

Degree of protection

IP67

Connection

connector M12 x 1

Material

Housing		ABS
Encapsulation compound		WEVO 403FL/300

Installation

Distance between two heads

Multiplex on: ≥ 100 mm
Multiplex off: ≥ 550 mm

Mass

approx. 180 g

Dimensions

Height		21 mm
Width		43.5 mm
Length		144.5 mm

General Notes