Place Holder Barrier KFD0-LGH-Y39343
- K-System place holder module
- Housing width 20 mm
- Marshalling for field and control side circuits
- Configurable via DIP switches and plug-in jumpers
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of KFD0-LGH-Y39343
| Product Description |
|---|
| Place holder barrier for KF modules with DIP switches |
| Electrical specifications | ||
|---|---|---|
| Rated voltage | ≤ 50 V | |
| Rated current | ≤ 2 A | |
| Indicators/settings | ||
| Control elements | DIP switch | |
| Configuration | via internal wire jumpers via internal DIP switches |
|
| Labeling | space for labeling at the front | |
| Conformity | ||
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | screw terminals | |
| Mass | approx. 100 g | |
| Dimensions | 20 x 112 x 115 mm (0.8 x 4.4 x 4.5 inch) (W x H x D) , housing type B1 | |
| Height | 112 mm | |
| Width | 20 mm | |
| Depth | 115 mm | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| Certificate | PF 08 CERT 1214 X | |
| Marking |  II 3G Ex nA IIC T4 Gc |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27219090 |
| ECLASS 12.0 | 27219090 |
| ECLASS 11.0 | 27219290 |
| ECLASS 10.0.1 | 27219290 |
| ECLASS 9.0 | 27219290 |
| ECLASS 8.0 | 27219290 |
| ECLASS 5.1 | 27279201 |
| ETIM 9.0 | EC003015 |
| ETIM 8.0 | EC003015 |
| ETIM 7.0 | EC003015 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 39121008 |
Details: KFD0-LGH-Y39343
Function
The device is used in cable distribution cables. The device improves accessibility and compactness within a switch cabinet.
Durch Different configurations are possible by using wire jumpers and DIP switches. The wire jumpers and DIP switches are located in the device. To configure the device, you have to open the device.
Product Documentation: KFD0-LGH-Y39343
| Safety and Security Documentation | Language | File Type | File Size |
|---|---|---|---|
| Operating instructions Place Holder Barriers K-System | ENG | 59 KB |
Design / Simulation: KFD0-LGH-Y39343
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1854 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: KFD0-LGH-Y39343
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| Europe Pepperl+Fuchs Certificate of Compliance ATEX Category 3 | PF 08 CERT 1214 X | ALL | 208 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0031C | ALL | 52 KB | |
Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.
Pepperl+Fuchs (Pty) Ltd
8 Glen Eagle Office Park
Koorsboom Ave, Glen Marais, Kempton Park
1619 Johannesburg
South Africa
info@za.pepperl-fuchs.com
+27 87985 0797
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.