Serviceline Industrial Sensors
Serviceline Explosion Protection

Antenna W-ANT-2400-6dB-ROD-NF

W-ANT-2400-6dB-ROD-NF
  • Rod antenna
  • For outdoor use

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  W-ANT-2400-6dB-ROD-NF

Product Description
Rod antenna for 2.4 GHz band
General specifications
Frequency range2.4 ... 2.5 GHz
Antenna gain6 dBi
Polarizationvertical
Impedance50 Ω
Nominal ratings
Beam angle (-3 dB)360° horizontal, 30° vertical
Ambient conditions
Operating temperature-40 ... 80 °C (-40 ... 176 °F)
Storage temperature-40 ... 80 °C (-40 ... 176 °F)
Mechanical specifications
Connection typeN socket
Degree of protectionIP67
Materialfiberglass
Mass300 g
Dimensions∅ 22 mm x 250 mm

Associated Products: W-ANT-2400-6dB-ROD-NF

Accessory of
MODBUS WirelessHART Gateway, Graphical network analysis, Simple and automatic configuration options, Ethernet and RS 485 interface, HART and MODBUS protocol via both interfaces, Input WirelessHART wireless interface, 24 V DC supply, Redundant power supply connectionspa
EtherNet/IP WirelessHART Gateway, Graphical network analysis, Simple and automatic configuration options, Ethernet and RS 485 interface, HART protocol via both interfaces, EtherNet/IP protocol via Ethernet interface, Input WirelessHART wireless interface, 24 V DC supply, Redundant power supply connectionspa
Accessories
Preconfigured with 1 m, 2 m, 5 m, or 10 m length, For high frequency applications up to 6 GHz, Double shieldedpa

Function: W-ANT-2400-6dB-ROD-NF

The rod antenna is suitable for a frequency range from 2.4 GHz to 2.5 GHz. The antenna gain is 6 dBi.

The antenna can be connected to the WirelessHART Gateway using preconfigured coaxial cables.

For installation examples, see the manual of the WirelessHART Gateway.

WirelessHART Adapter BULLET

The BULLET is the only WirelessHART adapter on the market in an Ex d housing. Simply connect the BULLET to your field device and enable efficient, wireless signal transmission.