请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
產品規格摘要：的技術資料
RLK29-55-5060
| 產品描述 |
| Robust, compact, long range photoelectric sensors for detecting people, objects and vehicles |
| General specifications |
| Effective detection range | 0 ... 12 m |
| Reflector distance | 0.04 ... 12 m |
| Threshold detection range | 14 m |
| Reference target | reflector C110-2 Diameter: 84 mm , included with delivery |
| Light source | LED |
| Light type | modulated visible red light , 640 nm |
| Diameter of the light spot | approx. 35 mm at a distance of 12 m |
| Opening angle | ± 1 ° |
| Ambient light limit | 90000 Lux |
| Functional safety related parameters |
| MTTFd | 1460 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Function indicator | LED red
illuminates: when beam is free
flashes: when level falls below function reserve
off: when beam is interrupted |
| Electrical specifications |
| Operating voltage | 24 ... 230 V AC/DC |
| Ripple | 10 % |
| No-load supply current | ≤ 8.5 mA |
| Power consumption | 0.2 W at 24 V DC , 1.8 W at 230 V AC 3 VA |
| Output |
| Switching type | light-on |
| Signal output | Relay, 1 alternator |
| Switching voltage | 230 V AC |
| Switching current | max. 2 A |
| Switching frequency | 7 Hz |
| Response time | 50 ms |
| Conformity |
| Product standard | EN 60947-5-2 |
| Approvals and certificates |
| CE conformity | yes |
| UL approval | cULus Listed
Caution: This equipment is considered as open-type equipment. It must be mounted within an enclosure, that is suitably designed for protection against internal fire and personal injury resulting from accessibility to live parts according UL 508. |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | terminal compartment |
| Material | |
| Housing | Plastic ABS, flame resistant |
| Optical face | plastic |
| Mass | approx. 200 g |
| Dimensions | |
| Height | 88 mm |
| Width | 25.8 mm |
| Depth | 65.5 mm |
| Note | Safety fuse ≤ 2 A (slow-blow) according to IEC 60127-2 Sheet 1
Recommendation: after a short circuit, check that the device is functioning correctly. |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270902 |
| ECLASS 12.0 | 27270902 |
| ECLASS 11.0 | 27270902 |
| ECLASS 10.0.1 | 27270902 |
| ECLASS 9.0 | 27270902 |
| ECLASS 8.0 | 27270902 |
| ECLASS 5.1 | 27270902 |
| ETIM 9.0 | EC002717 |
| ETIM 8.0 | EC002717 |
| ETIM 7.0 | EC002717 |
| ETIM 6.0 | EC002717 |
| ETIM 5.0 | EC002717 |
| UNSPSC 12.1 | 39121528 |
Details:
RLK29-55-5060
Design / Simulation:
RLK29-55-5060
相關產品:
RLK29-55-5060
| Accessories |
|
|
|
| Mounting bracket fa |
|
|
|
|
| Mounting bracket for rear wall mountingfa |
|
|
|
|
|
| Mounting bracket for rear wall mountingfa |
|
|
|
|
| Mounting bracket: mounting aid for sensors in the RL* seriesfa |
|
|
|
|
| Reflective tape 100 mm x 100 mmfa |
|
|
|
|
| Reflector, round ø 84 mm, central mounting holefa |
|
|
|
|
| Reflector, rectangular 182 mm x 42 mm, mounting holesfa |
|
|
|
|
| Reflector, rectangular 60 mm x 18 mm, mounting holesfa |
|
|
|
|
| Reflector, rectangular 84.5 mm x 84.5 mm, mounting holesfa |
|
|
|
|
| Reflector with mounting holesfa |
|
|
|
|
| Reflector, rectangular 51 mm x 61 mm, mounting holes, fixing strapfa |
|
+886 2 27227708