请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
NBN4-12GK50-E2-1,5M-V1
General specifications |
Switching function | Normally open (NO) |
Output type | PNP |
Rated operating distance | 4 mm |
Installation | non-flush |
Output polarity | DC |
Assured operating distance | 0 ... 3.24 mm |
Reduction factor rAl | 0.5 |
Reduction factor rCu | 0.4 |
Reduction factor r304 | 0.8 |
Output type | 3-wire |
Nominal ratings |
Operating voltage | 10 ... 30 V |
Switching frequency | 0 ... 1200 Hz |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | pulsing |
Voltage drop | ≤ 3 V |
Operating current | 0 ... 200 mA |
Off-state current | 0 ... 0.5 mA typ. 0.1 µA at 25 °C |
No-load supply current | ≤ 17 mA |
Switching state indicator | LED, yellow |
Compliance with standards and directives |
Standard conformity | |
| Standards | EN IEC 60947-5-2 |
Approvals and certificates |
UL approval | cULus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Mechanical specifications |
Connection type | fixed cable with plug |
Housing material | PBT |
Sensing face | PBT |
Degree of protection | IP68 / IP69K |
Connector | |
| Threading | M12 x 1 |
| Tightening torque | 0.6 Nm |
| Number of pins | 3 |
Cable | |
| Cable diameter | 3.5 mm ± 0.1 mm |
| Bending radius | > 10 x cable diameter |
| Material | PUR |
| Color | grey |
| Number of cores | 3 |
| Core cross section | 0.14 mm2 |
| Length | 1.5 m |
Dimensions | |
| Length | 50 mm |
| Diameter | 12 mm |
Note | use only delivered nuts |
Classifications
System | Classcode |
ECLASS 13.0 | 27274001 |
ECLASS 12.0 | 27274001 |
ECLASS 11.0 | 27270101 |
ECLASS 10.0.1 | 27270101 |
ECLASS 9.0 | 27270101 |
ECLASS 8.0 | 27270101 |
ECLASS 5.1 | 27270101 |
ETIM 9.0 | EC002714 |
ETIM 8.0 | EC002714 |
ETIM 7.0 | EC002714 |
ETIM 6.0 | EC002714 |
ETIM 5.0 | EC002714 |
UNSPSC 12.1 | 39121550 |
Details:
NBN4-12GK50-E2-1,5M-V1
Product Documentation:
NBN4-12GK50-E2-1,5M-V1
Design / Simulation:
NBN4-12GK50-E2-1,5M-V1
Approvals:
NBN4-12GK50-E2-1,5M-V1
相關產品:
NBN4-12GK50-E2-1,5M-V1
Accessories |
|
|
|
Mounting flange, 12 mmfa |
|
|
|
|
torque screwdriver (0.6 Nm)fa |
|
|
|
|
plug-in cap M12fa |
|