请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
NBN4-12GM30-A0-V1
General specifications |
Switching function | complementary |
Output type | NPN |
Rated operating distance | 4 mm |
Installation | non-flush |
Output polarity | DC |
Assured operating distance | 0 ... 3.24 mm |
Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 12 mm x 12 mm x 1 mm |
Reduction factor rAl | 0.47 |
Reduction factor rCu | 0.43 |
Reduction factor r304 | 0.85 |
Reduction factor rBrass | 0.55 |
Output type | 4-wire |
Nominal ratings |
Operating voltage | 5 ... 36 V |
Switching frequency | 0 ... 2650 Hz |
Hysteresis | typ. 5 % |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | pulsing |
Voltage drop | ≤ 1 V |
Operating current | 0 ... 200 mA |
Off-state current | max. 20 µA |
No-load supply current | ≤ 15 mA |
Time delay before availability | ≤ 10 ms |
Switching state indicator | Multihole-LED, yellow |
Functional safety related parameters |
MTTFd | 1248 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Conformity |
PWIS conformity | VDMA 24364-A1/B2/C1/T100°C-W |
Compliance with standards and directives |
Standard conformity | |
| Standards | EN IEC 60947-5-2 |
Approvals and certificates |
Protection class | II |
| Rated insulation voltage | 36 V |
| Rated impulse withstand voltage | 500 V |
UL approval | cULus Listed, General Purpose, Class 2 Power Source |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Marine approval | DNVGL TAA00003AK |
Ambient conditions |
Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications |
Connection type | Connector plug |
Housing material | brass , white bronze coated |
Sensing face | PBT , green |
Degree of protection | IP65 / IP66 / IP67 / IP68 |
Connector | |
| Threading | M12 x 1 |
| Number of pins | 4 |
Mass | 21 g |
Dimensions | |
| Length | 44.5 mm |
| Diameter | 12 mm |
Mounting | with nuts, M12 |
Tightening torque | 0 ... 10 Nm |
General information |
Scope of delivery | 2 self locking nuts in scope of delivery |
Classifications
System | Classcode |
ECLASS 13.0 | 27274001 |
ECLASS 12.0 | 27274001 |
ECLASS 11.0 | 27270101 |
ECLASS 10.0.1 | 27270101 |
ECLASS 9.0 | 27270101 |
ECLASS 8.0 | 27270101 |
ECLASS 5.1 | 27270101 |
ETIM 9.0 | EC002714 |
ETIM 8.0 | EC002714 |
ETIM 7.0 | EC002714 |
ETIM 6.0 | EC002714 |
ETIM 5.0 | EC002714 |
UNSPSC 12.1 | 39121550 |
Details:
NBN4-12GM30-A0-V1
Product Documentation:
NBN4-12GM30-A0-V1
Design / Simulation:
NBN4-12GM30-A0-V1
Approvals:
NBN4-12GM30-A0-V1
相關產品:
NBN4-12GM30-A0-V1
Accessories |
|
|
|
Mounting flange, 12 mmfa |
|
|
|
|
Plastic mounting adapter, 12 mmfa |
|
|
|
|
Mounting brackets for sensorsfa |
|
|
|
|
Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa |
|
|
|
|
Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa |
|
|
|
|
Female connector M12 straight A-coded 4-pin, for cable diameter 4 - 6 mm, field-attachablefa |
|
|
|
|
Female connector M12 angled A-coded 4-pin, for cable diameter 4 - 6 mm, field-attachablefa |
|