工業感測器服務資訊
+886 2 27227708
+886-2-27227782
防爆產品服務資訊
Rotation Speed Monitor KFU8-DW-1.D
- Speed monitoring up to 40 kHz
- 1 pre-select value with relay output and LED indicator
- 2-, 3-, 4-wire and NAMUR sensors as well as rotary encoder connectable
- Start-up delay
- Menu driven operation via 4 front keys
- Period measurement
- Output signal can be inverted
- Display devices can be set between 0.1 ... 2.5 sec.
请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
將完整的規格書下載為PDF:
產品規格摘要：的技術資料 KFU8-DW-1.D
| 產品描述 |
|---|
| Rotation Speed Monitor |
| Functional safety related parameters | ||
|---|---|---|
| MTTFd | 100 a | |
| Supply | ||
| Rated voltage | 200 ... 230 V AC ; 100 … 130 V AC; 50/60 Hz 20 VDC ... 30 VDC |
|
| Fusing | external fusing 4 A | |
| Power consumption | AC: < 5 VA DC: < 5 W |
|
| Input 1 | ||
| Connection | terminals 8-, 9+ | |
| Connectable sensor types | NAMUR sensors according to DIN EN 60947-5-6 | |
| Open loop voltage | 8.2 V DC | |
| Short-circuit current | 6.5 mA | |
| Switching point | 1.2 ... 2.1 mA Switching hysteresis approx. 0.2 mA | |
| Input frequency | 0.002 ... 10000 Hz, pulse length/duration: ≥ 20µs | |
| Impedance | 1.2 kΩ | |
| Input 2 | ||
| Switching point | high: 16 ... 30 V DC; max.10 mA due to integrated constant current sink; Ri ≅ 3 kΩ low: 0 ... 6 V DC |
|
| Input frequency | 0.002 ... 40000 Hz, pulse length/duration: ≥ 12µs | |
| Connection | terminals 7+, 13- sensor supply terminals 14, 15 NPN/PNP input (galvanically isolated) |
|
| Connectable sensor types | 2-, 3-, or 4-wire proximity sensor, incremental rotary encoder, or externally generated pulses 16 ... 30 V | |
| Sensor supply | 19 ... 28 V DC non-stabilised; ≤ 30 mA short-circuit protected | |
| Input 3 | ||
| Start-up override | Triggering by external signal 16 ... 30 V or Place jumper between terminals 2/3 or by switching on supply voltage (terminal 2 and terminal 3 permanently bridged) | |
| Hold-up time | 0.1 ... 999.9 s (External trigger signal) | |
| Output | ||
| Relay | 1 changeover contact NO, NC, COM |
|
| Sensor supply | 24 V DC ± 10 %, 30 mA , short-circuit protected | |
| Contact loading | 250 V AC/2 A/ cos φ ≥ 0.7 40 V DC/2 A |
|
| Delay | ≤ 20 ms (incl. calculation time) | |
| Mechanical life | ≥ 30.000.000 switching cycles | |
| Transfer characteristics | ||
| Changing interval | 5 ms (Internal processing time) | |
| Time delay before availability | ≤ 400 ms | |
| Measuring error | 0 ... 40000 Hz: ≤ ±0,10% Display: ±1 digit |
|
| Timer function | ON-delay, OFF-delay, one shot, pulse extension | |
| Time | 0 ... 999.9 s ; mode of operation reversible | |
| Standard conformity | ||
| Electromagnetic compatibility | acc. to EN 50081-2 / EN 50082-2 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 40 °C (-13 ... 104 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | max. 80 %, not condensing | |
| Altitude | 0 ... 2000 m | |
| Operating conditions | The device has only to be used in an indoor area. | |
| Mechanical specifications | ||
| Connection assembly | Caution: Please be aware that the device may only be connected to a switchable power supply. The switch or circuit breaker must be easy to reach and identified as the separator for the device. | |
| Degree of protection | IP20 | |
| Connection | coded, removable terminals , max. core cross section 0.34 ... 2.5 mm2 | |
| Construction type | modular terminal housing in Makrolon, System KF For use in the switch cabinet/switch cabinet module |
|
| Mounting | snap-on to 35 mm standard rail or screw fixing | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210904 |
| ECLASS 12.0 | 27210904 |
| ECLASS 11.0 | 27210904 |
| ECLASS 10.0.1 | 27210904 |
| ECLASS 9.0 | 27210904 |
| ECLASS 8.0 | 27210904 |
| ECLASS 5.1 | 27210904 |
| ETIM 9.0 | EC002918 |
| ETIM 8.0 | EC002918 |
| ETIM 7.0 | EC002918 |
| ETIM 6.0 | EC002918 |
| ETIM 5.0 | EC002475 |
| UNSPSC 12.1 | 39121007 |
Details: KFU8-DW-1.D
Product Documentation: KFU8-DW-1.D
| Manuals | 語言 | 檔案類型 | 檔案尺寸 |
|---|---|---|---|
| Manual KFU8-DW-1.D | ENG | 1046 KB | |
| Manual | ENG | 3685 KB |
Design / Simulation: KFU8-DW-1.D
| CAD | 語言 | 檔案類型 | 檔案尺寸 |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2019 KB |
| CAE | |||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 1701 KB |
Approvals: KFU8-DW-1.D
| Certificates | 證書號碼 | 語言 | 檔案類型 | 檔案尺寸 |
|---|---|---|---|---|
| Canada, USA CSA cUL | 80078445 | ALL | 57 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-1838C | ALL | 117 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6863 | ALL | 107 KB | |
Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.
台灣倍加福有限公司
信義路5段150巷2號21樓之4
信義區
11059 台北市 臺灣
臺灣
fa-info@tw.pepperl-fuchs.com
+886 2 27227708
© 2024 版權所有
Pepperl+Fuchs 倍加福是領先全球的電子感測器 和 零組件的開發與製造商. 超過七十年的不斷創新、穩定的品質與持續的業績增長，成就了今日的我們， Pepperl+Fuchs 倍加福在全球擁有 6,300 名員工，並在德國、美國、新加坡、匈牙利、印尼和越南都設有製造工廠，其中多數工廠已通過 ISO 9001 認證