工業感測器服務資訊
+886 2 27227708
+886-2-27227782
防爆產品服務資訊

Adapter plate MHV-BT-F31K/F31K2

MHV-BT-F31K/F31K2
  • Simple mounting
  • All-in-one stainless steel solution
  • Minimal friction due to ball bearing
  • Conforming to standards

请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:


產品規格摘要:的技術資料  MHV-BT-F31K/F31K2

產品描述
Adapter plate for dual sensors F31K/-F31K2 series
General specifications
Suitable sensors and Dual sensors, -F31K series with actuator BT65...
Dual sensors, -F31K2 series with actuator BT65...
Standard conformity
StandardsVDI / VDE 3845
DIN EN ISO 5211
Mechanical specifications
Shaft diameter16 mm
Shaft height20 mm
Mounting hole patternsensor: 30 x 80 mm, M5 screw
mounting bracket: 4 x 50 mm, M6 screw
Materialstainless steel 1.4301 / AISI 304 for plates and sheet metal bending parts
Stainless steel 1.4305 / AISI 303 for shaft
Mounting materialsstainless steel socket cap head screws 4 x M6 x 8 mm
Mass636 g
Dimensions
Height53.5 mm
Width99 mm
Length182 mm

Classifications

SystemClasscode
ECLASS 13.027273701
ECLASS 12.027273701
ECLASS 11.027273792
ECLASS 10.0.127273792
ECLASS 9.027273792
ECLASS 8.027279202
ECLASS 5.127279202
ETIM 9.0EC003015
ETIM 8.0EC003015
ETIM 7.0EC003015
ETIM 6.0EC003015
ETIM 5.0EC003015
UNSPSC 12.131162301

Details: MHV-BT-F31K/F31K2

Product Documentation: MHV-BT-F31K/F31K2

Language Selection:
Brief Instructions語言檔案類型檔案尺寸
Brief Instructions - Assembly of Fitting, Adapter Plate, Mounting Set, Double Sensor, ActuatorENGPDF272 KB

Design / Simulation: MHV-BT-F31K/F31K2

Language Selection:
CAD語言檔案類型檔案尺寸
CAD 3-D / CAD 3-DALLSTP933 KB
CAD Portal / CAD PortalALLLINK---

相關產品: MHV-BT-F31K/F31K2

Matching System Components
fa
fa
fa
fa
fa
Matching System Components
Extended temperature range, Valve position detection, Solenoid valve output, Suitable for 2:1 technology, Switching function: 2 x normally closed (NC), Output type: NAMUR, Installation: flush mountable, Output type: 2-wire, Construction type: Dual sensor, Series: Dual sensor, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx TUN 17.0021X, Equipment protection level Gb: IECEx TUN 17.0021X, Equipment protection level Mb: IECEx TUN 17.0021Xfa
Extended temperature range, Valve position detection, Solenoid valve output, Switching function: 2 x normally open (NO), Output type: Two-wire with minimum off-state current, Installation: for non-flush mounting, Output polarity: DC, Output type: 2x 2-wire, Construction type: Dual sensor, Series: Dual sensor, Type of voltage: DC, Connection (system side): screw terminal , M20 x 1.5 cable gland, Housing material: rugged, translucent polycarbonate (PC) optimised for outdoor usefa
Extended temperature range, Valve position detection, Solenoid valve output, Switching function: 2 x normally open (NO), Output type: Two-wire with minimum off-state current, Installation: for non-flush mounting, Output polarity: DC, Output type: 2x 2-wire, Construction type: Dual sensor, Series: Dual sensor, Type of voltage: DC, Equipment protection level Dc: IECEx TUR 20.0068X, Equipment protection level Dc: TÜV 20 ATEX 8598 Xfa
fa
fa
fa
fa
fa