工業感測器服務資訊
+886 2 27227708
+886-2-27227782
防爆產品服務資訊

Incremental rotary encoder RVI50N-09B**A*T

RVI50N-09B**A*T
  • Sturdy and compact design
  • Up to 2500 ppr
  • 4.75 V ... 30 V with short-circuit proof push-pull output

请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:


產品規格摘要:的技術資料  RVI50N-09B**A*T

產品描述
Incremental rotary encoder
General specifications
Detection typephotoelectric sampling
Pulse countmax. 2500
Electrical specifications
Operating voltage4.75 ... 30 V DC
No-load supply currentmax. 80 mA
Output
Output typepush-pull, incremental
Voltage drop< 4 V
Load currentmax. per channel 40 mA , short-circuit protected
Output frequencymax. 160 kHz
Rise time980 ns
De-energized delay980 ns
Connection
Connectortype 9416 (M23), 12-pin or type 42306 (M16), 6-pin
Cable∅6 mm, 5 x 0.38 mm2, 0.5 m
Standard conformity
Degree of protectionDIN EN 60529, IP50
Climatic testingDIN EN 60068-2-78 , no moisture condensation
Emitted interferenceEN 61000-6-4:2007/A1:2011
Noise immunityEN 61000-6-2:2005
Shock resistanceDIN EN 60068-2-27, 100 g, 3 ms
Vibration resistanceDIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature
Glass disk-20 ... 70 °C (-4 ... 158 °F)
Plastic disk-20 ... 60 °C (-4 ... 140 °F)
Storage temperature
Glass disk-40 ... 70 °C (-40 ... 158 °F)
Plastic disk-40 ... 60 °C (-40 ... 140 °F)
Mechanical specifications
Material
Housingpowder coated aluminum
Flange3.1645 aluminum
ShaftStainless steel 1.4305 / AISI 303
Massapprox. 220 g
Rotational speedmax. 10000 min -1
Moment of inertia≤ 5 gcm2
Starting torque≤ 1.5 Ncm
Shaft load
Axial30 N
Radial50 N
Dimensions
Length55 mm
Diameter50 mm

Classifications

SystemClasscode
ECLASS 13.027270501
ECLASS 12.027270501
ECLASS 11.027270501
ECLASS 10.0.127270501
ECLASS 9.027270501
ECLASS 8.027270501
ECLASS 5.127270501
ETIM 9.0EC001486
ETIM 8.0EC001486
ETIM 7.0EC001486
ETIM 6.0EC001486
ETIM 5.0EC001486
UNSPSC 12.139121527

Details: RVI50N-09B**A*T

Design / Simulation: RVI50N-09B**A*T

Language Selection:
CAD語言檔案類型檔案尺寸
CAD 3-D / CAD 3-DALLSTP103 KB
CAD Portal / CAD PortalALLLINK---
CAD Portal / CAD PortalALLLINK---

Approvals: RVI50N-09B**A*T

Language Selection:
Certificates證書號碼語言檔案類型檔案尺寸
Canada, USA UL General PurposeUL-US-2233187-0 / UL-CA-2232331-0ALLPDF493 KB
Canada, USA UL General PurposeCoC E223176 RepRef E223176-20050829ALLPDF409 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-4192ALLPDF1483 KB

相關產品: RVI50N-09B**A*T

Accessories
Synchro clamping elementfa
fa
Female cordsetfa
Socket, Straight, 6-polefa
Socket, Angled, 6-polefa
Spring steel coupling, Universally suitable for backlash-free rotation transmission, Highly vibration-isolating, Well misalignment compensation, Low torsion spring stiffness, Small reset forcesfa
Spring steel coupling, Universally suitable for backlash-free rotation transmission, Highly vibration-isolating, Well misalignment compensation, Low torsion spring stiffness, Small reset forcesfa
Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa
Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa
Measuring wheel for shaft diameter 8 mm, Plastic coating, 500 mm circumferencefa
Measuring wheel for shaft diameter 8 mm, Pimpled rubber coating, 500 mm circumferencefa
Measuring wheel for shaft diameter 8 mm, Knurled aluminum, 500 mm circumferencefa
Measuring wheel for shaft diameter 8 mm, Plastic coating, 200 mm circumferencefa
Measuring wheel for shaft diameter 8 mm, Pimpled rubber coating, 200 mm circumferencefa
Measuring wheel for shaft diameter 8 mm, Knurled aluminum, 200 mm circumferencefa
Measuring wheel for shaft diameter 8 mm, Knurled plastic, 500 mm circumferencefa
Measuring wheel for shaft diameter 8 mm, Knurled plastic, 200 mm circumferencefa