请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
產品規格摘要：的技術資料
VAZ-G10-LIMITER
| General specifications |
| Construction type | Flat cable terminals |
| Electrical specifications |
| Rated operating voltage | 24 V DC ± 10 % PELV |
| Protection class | III |
| Compliance with standards and directives |
| Standard conformity | |
| Degree of protection | EN 60529:2000 |
| Ambient conditions |
| Ambient temperature | -25 ... 50 °C (-13 ... 122 °F) |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Pollution degree | 3 |
| Mechanical specifications |
| Degree of protection | IP67
IP67 / IP68 / IP69K with flat cable VAZ-FK-S-* |
| Connection | Flat cable: cable piercing method |
| Material | |
| Contacts | CuSn / Au |
| Housing | PBT |
| Mounting screw | Stainless steel 1.4305 / AISI 303 |
| Mass | 40 g |
| Tightening torque, fastening screws | 1.65 Nm |
| Dimensions | |
| Height | 22 mm |
| Width | 27.7 mm |
| Length | 40.5 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27242692 |
| ECLASS 12.0 | 27242692 |
| ECLASS 11.0 | 27242692 |
| ECLASS 10.0.1 | 27242692 |
| ECLASS 9.0 | 27242692 |
| ECLASS 8.0 | 27279212 |
| ECLASS 5.1 | 27279212 |
| ETIM 9.0 | EC003015 |
| ETIM 8.0 | EC003015 |
| ETIM 7.0 | EC003015 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 39121535 |
Details:
VAZ-G10-LIMITER
Design / Simulation:
VAZ-G10-LIMITER
Approvals:
VAZ-G10-LIMITER
相關產品:
VAZ-G10-LIMITER
| Accessory of |
|
|
|
| G20 module for digital inputs/outputs, 3 inputs and 3 outputsfa |
|
|
|
|
| G20 module for digital inputs/outputs, 4 inputs and 3 outputsfa |
|
|
|
|
|
| G20 module for digital inputs/outputs, 4 inputs and 3 outputsfa |
|
|
|
|
| G20 motor control module for Interroll EC310, Interroll EC5000 24V AI, Rulmeca BL3, Itoh Denki PM500XK, Itoh Denki PM500XC, PULSEROLLER Senergy-IDCfa |
|
|
|
|
|
| G20 motor control module for Interroll EC310, Interroll EC5000 24V AI, Rulmeca BL3, Itoh Denki PM500XK, Itoh Denki PM500XC, PULSEROLLER Senergy-IDCfa |
|
|
|
|
|
| G20 motor control module for Itoh Denki PM500XE and PM500XPfa |
|
|
|
|
|
| G20 motor control module for Interroll EC310, Interroll EC5000 24V AI, Rulmeca BL3, Itoh Denki PM500XK, Itoh Denki PM500XC, Winroller WIN50 Series DC, PULSEROLLER Senergy-IDCfa |
|
|
|
|
|
| G20 motor control module for Interroll EC5000 48V AIfa |
|
+886 2 27227708