Surge Protection Barrier M-LB-2114.SP

Surge protection barrier for 2 signal lines
Nominal voltage 1 V DC
Surge protection barrier for grounded signal lines
Max. surge current (8/20 µs) 20 kA
Connection via spring terminals with push-in connection technology
DIN rail mountable
Up to SIL 3 acc. to IEC/EN 61508

Technical Data
Product Documentation
Design / Simulation
Approvals
配套产品

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:

產品規格摘要：的技術資料 M-LB-2114.SP

General specifications
Number of protected signal lines		2
Topology		grounded
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Electrical specifications
Connection		protected area: terminals 4, 5 unprotected area: terminals 2, 3 shielding/grounding: terminal 1 (optional)
Rated current		500 mA , restrictions see derating tables UL : 400 mA , restrictions see derating tables
Leakage current		< 10 µA at 1 V and 25 °C (77 °F) , line-line
Nominal voltage		1 V DC
Maximum continuous operating voltage		6 V DC
Series resistance		≤ 3 Ω per line
Impulse rating		1 kV/0.5 kA (category C1) 10 kV/5 kA (category C2) 1 kA (category D1)
Impulse discharge current (10/350 µs)		1 kA per line (2x)
Nominal discharge current (8/20 µs)		5 kA per line (10x)
Total discharge current (8/20 µs)		20 kA (1x) , overstressed fault mode 3 acc. to IEC 61643-21
Voltage protection level		max. 12 V line-line for nominal discharge current I_n max. 31 V line-earth for nominal discharge current I_n
Impulse reset time		< 500 ms
Insertion loss		≤ 3 dB at 0 ... 250 kHz in 100 Ω system
Conformity
Electromagnetic compatibility		EN 61326-3-1:2017
Degree of protection		IEC 60529:2013
Functional safety		IEC/EN 61508:2010
Surge protective devices for low voltage		IEC 61643-21:2000+A1:2008+A2:2012
Ambient conditions
Ambient temperature		-40 ... 80 °C (-40 ... 176 °F) Observe the temperature range limited by derating, see section derating.
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		max. 95 % , without condensation
Corrosion resistance		acc. to ISA-S71.04, severity level G3
Mechanical specifications
Degree of protection		IP20 , after mounting of the insulation spacer
Connection		spring terminals , max. core cross section 1 x 2.5 mm²
Material		Polyamide (PA)
Mass		approx. 32 g
Dimensions		6.2 x 93 x 72.4 mm (0.24 x 3.7 x 2.8 inch) (W x H x D)
	Height	93 mm
	Width	6.2 mm
	Depth	72.4 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
Certificate		KIWA 19 ATEX 0002 X
	Marking	II 3G Ex ec IIC T6...T4 Gc
	Temperature class	T6, T5 or T4 , restrictions see derating tables
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018
International approvals
UL approval		E501704 E501881
	Breakdown voltage	6 ... 12 V line-line at 100 V/s acc. to UL 497B 6 ... 12 V line-earth at 100 V/s acc. to UL 497B < 1000 V at 100 V/µs acc. to UL 497B
IECEx approval
	IECEx certificate	IECEx KIWA 19.0002X
	IECEx marking	Ex ec IIC T6...T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27171202
ECLASS 12.0	27171202
ECLASS 11.0	27130805
ECLASS 10.0.1	27130805
ECLASS 9.0	27130805
ECLASS 8.0	27130805
ECLASS 5.1	27130801
ETIM 9.0	EC000941
ETIM 8.0	EC000941
ETIM 7.0	EC000941
ETIM 6.0	EC000941
ETIM 5.0	EC000941
UNSPSC 12.1	39121610

Details: M-LB-2114.SP

Product Documentation: M-LB-2114.SP

Safety and Security Documentation	語言	檔案類型	檔案尺寸
Instruction manual	ENG	PDF	167 KB
Functional Safety Manual	ENG	PDF	602 KB
Manuals
Manual	ENG	PDF	3280 KB

Design / Simulation: M-LB-2114.SP

CAD	語言	檔案類型	檔案尺寸
CAD 3-D / CAD 3-D	ALL	STP	2840 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	139 KB
EPLAN macro P+F.M-LB-2114.SP with accessories / EPLAN-Makro P+F.M-LB-2114.SP mit Zubehör	ALL	EDZ	199 KB

Approvals: M-LB-2114.SP

Certificates	證書號碼	語言	檔案類型	檔案尺寸
Canada, USA UL Hazardous Location	CoC 20211011 - E501881 RepRef 20210517	ALL	PDF	421 KB
China SITIIAS CCC Ex Certificate	2020322304002905 (Singapore)	ALL	PDF	1097 KB
Europe KIWA ATEX Category 3 G	KIWA 19 ATEX 0002 X	ALL	PDF	90 KB
India PESO (India) CCOE	A/P/HQ/KA/104/6096 (P579052)	ALL	PDF	106 KB
Worldwide CSA IECEx Certificate of Conformity	IECEx KIWA 19.0002X	ALL	LINK	---
Worldwide ÖVE (Austria) Surge Protective Device	AT 4406	ALL	PDF	352 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)	TDOC-4286CENG	ENG	PDF	185 KB

相關產品: M-LB-2114.SP

Matching System Components

	USLKG6N Terminal Block
	Accessory Surge Protection, For equipotential bonding via DIN mounting railpa

Accessories

	M-LB-2800 Insulation Spacer
	For surge protection system M-LB-2000, Color black, DIN rail mountablepa

General Notes Relating to Pepperl+Fuchs Product Information

快速連結

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

存取功能安全模組

提供數百種產品以及產品的 SIL/PL 評估、免費工具和手冊：「功能安全模組」，是您實施安全功能的起點。

台灣倍加福有限公司
信義路5段150巷2號21樓之4
信義區
11059 台北市臺灣
臺灣
fa-info@tw.pepperl-fuchs.com
phone +886 2 27227708

Pepperl+Fuchs 倍加福是領先全球的電子感測器 和 零組件的開發與製造商. 超過七十年的不斷創新、穩定的品質與持續的業績增長，成就了今日的我們， Pepperl+Fuchs 倍加福在全球擁有 6,300 名員工，並在德國、美國、新加坡、匈牙利、印尼和越南都設有製造工廠，其中多數工廠已通過 ISO 9001 認證